Re: [PATCH] dt-bindings: input: Goodix SPI HID Touchscreen

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Doug,

On Fri, Oct 25, 2024 at 08:29:13AM -0700, Doug Anderson wrote:
> Charles,
> 
> On Fri, Oct 25, 2024 at 5:03 AM Krzysztof Kozlowski <krzk@xxxxxxxxxx> wrote:
> >
> > > +properties:
> > > +  compatible:
> > > +    enum:
> > > +      - goodix,gt7986u-spi
> >
> > Compatible is already documented and nothing here explains why we should
> > spi variant.
> >
> > > +
> > > +  reg:
> > > +    maxItems: 1
> > > +
> > > +  interrupts:
> > > +    maxItems: 1
> > > +
> > > +  reset-gpios:
> > > +    maxItems: 1
> > > +
> > > +  goodix,hid-report-addr:
> >
> > I do not see this patch addressing previous review. Sending something
> > like this as v1 after long discussions also does not help.
> 
> Krzysztof is right that it's better to wait until we get consensus on
> the previous discussion before sending a new patch. I know you were
> just trying to help move things forward, but because of the way the
> email workflow works, sending a new version tends to fork the
> discussion into two threads and adds confusion.
> 
> I know Krzysztof and Rob have been silent during our recent
> discussion, but it's also a long discussion. I've been assuming that
> they will take some time to digest and reply in a little bit. If they
> didn't, IMO it would have been reasonable to explicitly ask them for
> feedback in the other thread after giving a bit of time.
> 
> As Krzysztof mentioned, if/when you send the "goodix,gt7986u-spi"
> bindings again you'd want to:
> 
> * Make sure it's marked as v2.
> 
> * Make sure any previous review feedback has been addressed. For
> instance, I think Krzysztof requested that you _remove_ the
> goodix,hid-report-addr from the bindings and hardcode this into the
> driver because every GT7986U will have the same hid-report-addr. I
> know that kinda got lost in the discussion but it still needs to be
> addressed or at least responded to. I guess there was at least one
> other comment about "additionalProperties" that you should look for
> and address.
> 
> * Make sure there's some type of version history after-the-cut. Tools
> like "patman" and "b4" can help with this.
> 
> * The commit message should proactively address concerns that came up
> during the review process. In this case if we go with
> "goodix,gt7986u-spi" the commit message would want to say something
> explaining _why_ the "-spi" suffix is appropriate here even though
> normally it wouldn't be. That will help anyone digging through
> history.
> 

I apologize for any confusion caused. As a newcomer, I am still learning
about the community practices.

Thank you very much for your patience and clear explanation. I will recheck
the previous review feedback and provide a new patch marked as v2.

Best regards,
Charles




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux