On Fri, Oct 25, 2024 at 1:09 AM Cody Eksal <masterr3c0rd@epochal.quest> wrote:
>
> From: Yangtao Li <frank@xxxxxxxxxxxxxxxxx>
>
> Allwinner A64 have two HCI USB controllers, a OTG controller and a USB
^^^ Please update this.
> PHY device, let's add nodes on dts.
>
> Signed-off-by: Yangtao Li <frank@xxxxxxxxxxxxxxxxx>
> [masterr3c0rd@epochal.quest: fallback to a33-musb instead of h3-musb]
> Signed-off-by: Cody Eksal <masterr3c0rd@epochal.quest>
> ---
> .../arm64/boot/dts/allwinner/sun50i-a100.dtsi | 91 +++++++++++++++++++
> 1 file changed, 91 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
> index adb11b26045f..0aee1b578661 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
> @@ -302,6 +302,97 @@ ths: thermal-sensor@5070400 {
> #thermal-sensor-cells = <1>;
> };
>
> + usbphy: phy@5100400 {
> + #phy-cells = <1>;
> + compatible = "allwinner,sun50i-a100-usb-phy";
> + reg = <0x05100400 0x14>,
> + <0x05101800 0x4>,
> + <0x05200800 0x4>;
> + reg-names = "phy_ctrl",
> + "pmu0",
> + "pmu1";
> + clocks = <&ccu CLK_USB_PHY0>,
> + <&ccu CLK_USB_PHY1>;
> + clock-names = "usb0_phy",
> + "usb1_phy";
> + resets = <&ccu RST_USB_PHY0>,
> + <&ccu RST_USB_PHY1>;
> + reset-names = "usb0_reset",
> + "usb1_reset";
> + status = "disabled";
> + };
> +
> + ehci0: usb@5101000 {
> + compatible = "allwinner,sun50i-a100-ehci",
> + "generic-ehci";
> + reg = <0x05101000 0x100>;
> + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_OHCI0>,
> + <&ccu CLK_BUS_EHCI0>,
> + <&ccu CLK_USB_OHCI0>;
> + resets = <&ccu RST_BUS_OHCI0>,
> + <&ccu RST_BUS_EHCI0>;
> + phys = <&usbphy 0>;
> + phy-names = "usb";
> + status = "disabled";
> + };
> +
> + ohci0: usb@5101400 {
> + compatible = "allwinner,sun50i-a100-ohci",
> + "generic-ohci";
> + reg = <0x05101400 0x100>;
> + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_OHCI0>,
> + <&ccu CLK_USB_OHCI0>;
> + resets = <&ccu RST_BUS_OHCI0>;
> + phys = <&usbphy 0>;
> + phy-names = "usb";
> + status = "disabled";
> + };
> +
> + usb_otg: usb@5100000 {
> + compatible = "allwinner,sun50i-a100-musb",
> + "allwinner,sun8i-a33-musb";
> + reg = <0x05100000 0x0400>;
> + clocks = <&ccu CLK_BUS_OTG>;
> + resets = <&ccu RST_BUS_OTG>;
> + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "mc";
> + phys = <&usbphy 0>;
> + phy-names = "usb";
> + extcon = <&usbphy 0>;
> + dr_mode = "otg";
> + status = "disabled";
> + };
> +
> + ehci1: usb@5200000 {
> + compatible = "allwinner,sun50i-a100-ehci",
> + "generic-ehci";
> + reg = <0x05200000 0x100>;
> + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_OHCI1>,
> + <&ccu CLK_BUS_EHCI1>,
> + <&ccu CLK_USB_OHCI1>;
> + resets = <&ccu RST_BUS_OHCI1>,
> + <&ccu RST_BUS_EHCI1>;
> + phys = <&usbphy 1>;
> + phy-names = "usb";
> + status = "disabled";
> + };
> +
> + ohci1: usb@5200400 {
> + compatible = "allwinner,sun50i-a100-ohci",
> + "generic-ohci";
> + reg = <0x05200400 0x100>;
> + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_OHCI1>,
> + <&ccu CLK_USB_OHCI1>;
> + resets = <&ccu RST_BUS_OHCI1>;
> + phys = <&usbphy 1>;
> + phy-names = "usb";
> + status = "disabled";
> + };
> +
> r_ccu: clock@7010000 {
> compatible = "allwinner,sun50i-a100-r-ccu";
> reg = <0x07010000 0x300>;
> --
> 2.47.0
>
>
