UFS Gear 4 offers faster speeds, and better power usage so lets
enable it.
Currently ufshcd_init_host_params() sets UFS_HS_G3 as a default,
so even if the device supports G4 we end up negotiating down to
G3.
For SoCs like gs101 which have a UFS major controller version
of 3 or above advertise Gear 4. This then allows a Gear 4 link
on Pixel 6.
For earlier controller versions keep the current default behaviour
of reporting G3.
Signed-off-by: Peter Griffin <peter.griffin@xxxxxxxxxx>
---
drivers/ufs/host/ufs-exynos.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/drivers/ufs/host/ufs-exynos.c b/drivers/ufs/host/ufs-exynos.c
index 9ec318ef52bf..e25de4b86ac0 100644
--- a/drivers/ufs/host/ufs-exynos.c
+++ b/drivers/ufs/host/ufs-exynos.c
@@ -771,6 +771,21 @@ static void exynos_ufs_config_sync_pattern_mask(struct exynos_ufs *ufs,
exynos_ufs_disable_ov_tm(hba);
}
+#define UFS_HW_VER_MAJOR_MASK GENMASK(15, 8)
+
+static u32 exynos_ufs_get_hs_gear(struct ufs_hba *hba)
+{
+ u8 major;
+
+ major = FIELD_GET(UFS_HW_VER_MAJOR_MASK, hba->ufs_version);
+
+ if (major >= 3)
+ return UFS_HS_G4;
+
+ /* Default is HS-G3 */
+ return UFS_HS_G3;
+}
+
static int exynos_ufs_pre_pwr_mode(struct ufs_hba *hba,
struct ufs_pa_layer_attr *dev_max_params,
struct ufs_pa_layer_attr *dev_req_params)
@@ -787,6 +802,8 @@ static int exynos_ufs_pre_pwr_mode(struct ufs_hba *hba,
}
ufshcd_init_host_params(&host_params);
+ /* This driver only support symmetric gear setting e.g. hs_tx_gear == hs_rx_gear */
+ host_params.hs_tx_gear = host_params.hs_rx_gear = exynos_ufs_get_hs_gear(hba);
ret = ufshcd_negotiate_pwr_params(&host_params, dev_max_params, dev_req_params);
if (ret) {
--
2.47.0.163.g1226f6d8fa-goog
