On Tue, Oct 22, 2024 at 04:54:34PM GMT, Lijuan Gao wrote:
"arm64: dts: qcom: add base QCS615 RIDE dts"
^ You already have dts here ^ no need to put it here again
I'd suggest that we make the subject "arm64: dts: qcom: Add QCS615 RIDE board"
> Add initial support for Qualcomm QCS615 RIDE board and enable
> the QCS615 RIDE board to shell with uart console.
>
> [Tingguo: added regulator nodes]
Are you saying:
- Lijuan wrote the patch
- Lijuan signed the certificate of origin (i.e. he's allowed to
contribute its content)
- Tingguo added regulator nodes
- Tingguo signed the certificate of origin (i.e. patch was based on work
that was certified)
Or are you saying:
"Tingguo and I developed this patch in pair programming fashion"
If so, I'd suggest dropping the "[Tingguo:...]" line.
> Co-developed-by: Tingguo Cheng <quic_tingguoc@xxxxxxxxxxx>
> Signed-off-by: Tingguo Cheng <quic_tingguoc@xxxxxxxxxxx>
> Signed-off-by: Lijuan Gao <quic_lijuang@xxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> arch/arm64/boot/dts/qcom/qcs615-ride.dts | 219 +++++++++++++++++++++++++++++++
> 2 files changed, 220 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 065bb19481c1..f14643187cac 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -110,6 +110,7 @@ dtb-$(CONFIG_ARCH_QCOM) += qcm6490-idp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qcm6490-shift-otter.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += qcs615-ride.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qcs6490-rb3gen2.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qcs8550-aim300-aiot.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb
> diff --git a/arch/arm64/boot/dts/qcom/qcs615-ride.dts b/arch/arm64/boot/dts/qcom/qcs615-ride.dts
> new file mode 100644
> index 000000000000..ee6cab3924a6
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/qcs615-ride.dts
> @@ -0,0 +1,219 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +/dts-v1/;
> +
> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> +#include "qcs615.dtsi"
> +/ {
> + model = "Qualcomm Technologies, Inc. QCS615 Ride";
> + compatible = "qcom,qcs615-ride", "qcom,qcs615";
> + chassis-type = "embedded";
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + clocks {
> + sleep_clk: sleep-clk {
> + compatible = "fixed-clock";
> + clock-frequency = <32000>;
> + #clock-cells = <0>;
> + };
> +
> + xo_board_clk: xo-board-clk {
> + compatible = "fixed-clock";
> + clock-frequency = <38400000>;
> + #clock-cells = <0>;
> + };
> + };
> +};
> +
> +&apps_rsc {
> + regulators-0 {
> + compatible = "qcom,pm8150-rpmh-regulators";
> + qcom,pmic-id = "a";
> +
> + vreg_s3a: smps3 {
You don't reference any of these regulators.
Can you please confirm that when you boot the qcs615 ride device with
this dtb it actually boots with a debug uart and does not crash when the
regulator framework disable all these "unused" regulators?
Regards,
Bjorn
> + regulator-name = "vreg_s3a";
> + regulator-min-microvolt = <600000>;
> + regulator-max-microvolt = <650000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_s4a: smps4 {
> + regulator-name = "vreg_s4a";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1829000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_s5a: smps5 {
> + regulator-name = "vreg_s5a";
> + regulator-min-microvolt = <1896000>;
> + regulator-max-microvolt = <2040000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_s6a: smps6 {
> + regulator-name = "vreg_s6a";
> + regulator-min-microvolt = <1304000>;
> + regulator-max-microvolt = <1404000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l1a: ldo1 {
> + regulator-name = "vreg_l1a";
> + regulator-min-microvolt = <488000>;
> + regulator-max-microvolt = <852000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + regulator-allow-set-load;
> + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l2a: ldo2 {
> + regulator-name = "vreg_l2a";
> + regulator-min-microvolt = <1650000>;
> + regulator-max-microvolt = <3100000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + regulator-allow-set-load;
> + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l3a: ldo3 {
> + regulator-name = "vreg_l3a";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1248000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + regulator-allow-set-load;
> + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l5a: ldo5 {
> + regulator-name = "vreg_l5a";
> + regulator-min-microvolt = <875000>;
> + regulator-max-microvolt = <975000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + regulator-allow-set-load;
> + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l7a: ldo7 {
> + regulator-name = "vreg_l7a";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1900000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + regulator-allow-set-load;
> + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l8a: ldo8 {
> + regulator-name = "vreg_l8a";
> + regulator-min-microvolt = <1150000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + regulator-allow-set-load;
> + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l10a: ldo10 {
> + regulator-name = "vreg_l10a";
> + regulator-min-microvolt = <2950000>;
> + regulator-max-microvolt = <3312000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + regulator-allow-set-load;
> + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l11a: ldo11 {
> + regulator-name = "vreg_l11a";
> + regulator-min-microvolt = <1232000>;
> + regulator-max-microvolt = <1260000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + regulator-allow-set-load;
> + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l12a: ldo12 {
> + regulator-name = "vreg_l12a";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1890000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + regulator-allow-set-load;
> + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l13a: ldo13 {
> + regulator-name = "vreg_l13a";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3230000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + regulator-allow-set-load;
> + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l15a: ldo15 {
> + regulator-name = "vreg_l15a";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1904000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + regulator-allow-set-load;
> + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l16a: ldo16 {
> + regulator-name = "vreg_l16a";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3312000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + regulator-allow-set-load;
> + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l17a: ldo17 {
> + regulator-name = "vreg_l17a";
> + regulator-min-microvolt = <2950000>;
> + regulator-max-microvolt = <3312000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +};
> +
> +&gcc {
> + clocks = <&rpmhcc RPMH_CXO_CLK>,
> + <&rpmhcc RPMH_CXO_CLK_A>,
> + <&sleep_clk>;
> +};
> +
> +&qupv3_id_0 {
> + status = "okay";
> +};
> +
> +&rpmhcc {
> + clocks = <&xo_board_clk>;
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> +
> +&watchdog {
> + clocks = <&sleep_clk>;
> +};
>
> --
> 2.46.0
>
