Re: [PATCH v3 3/6] EDAC/fsl_ddr: Fix bad bit shift operations

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Oct 22, 2024 at 11:44:29AM +0200, Borislav Petkov wrote:
> On Wed, Oct 16, 2024 at 04:31:11PM -0400, Frank Li wrote:
> > From: Priyanka Singh <priyanka.singh@xxxxxxx>
> >
> > Fix undefined behavior caused by left-shifting a negative value in the
> > expression:
> >
> >     cap_high ^ (1 << (bad_data_bit - 32))
> >
> > The variable 'bad_data_bit' ranges from 0 to 63. When 'bad_data_bit' is
> > less than 32, 'bad_data_bit - 32' becomes negative, and left-shifting by a
> > negative value in C is undefined behavior.
> >
> > Fix this by combining 'cap_high' and 'cap_low' into a 64-bit variable.
> >
> > Fixes: ea2eb9a8b620 ("EDAC, fsl-ddr: Separate FSL DDR driver from MPC85xx")
> > Signed-off-by: Priyanka Singh <priyanka.singh@xxxxxxx>
> > Reviewed-by: Sherry Sun <sherry.sun@xxxxxxx>
>
> You can't keep Reviewed-by tags when you change a patch considerably: Documentation/process/submitting-patches.rst
>
> > Signed-off-by: Li Yang <leoyang.li@xxxxxxx>
>
> What does that SOB tag mean?
>
> > Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
> > ---
> >  drivers/edac/fsl_ddr_edac.c | 13 ++++++++++---
> >  1 file changed, 10 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/edac/fsl_ddr_edac.c b/drivers/edac/fsl_ddr_edac.c
> > index 7a9fb1202f1a0..846a4ba25342a 100644
> > --- a/drivers/edac/fsl_ddr_edac.c
> > +++ b/drivers/edac/fsl_ddr_edac.c
> > @@ -328,6 +328,9 @@ static void fsl_mc_check(struct mem_ctl_info *mci)
> >  	 * TODO: Add support for 32-bit wide buses
> >  	 */
> >  	if ((err_detect & DDR_EDE_SBE) && (bus_width == 64)) {
> > +		u64 cap = (u64)cap_high << 32 | (u64)cap_low;
> > +		u32 s = syndrome;
> > +
> >  		sbe_ecc_decode(cap_high, cap_low, syndrome,
> >  				&bad_data_bit, &bad_ecc_bit);
> >
> > @@ -338,11 +341,15 @@ static void fsl_mc_check(struct mem_ctl_info *mci)
> >  			fsl_mc_printk(mci, KERN_ERR,
> >  				"Faulty ECC bit: %d\n", bad_ecc_bit);
> >
> > +		if (bad_data_bit >= 0)
>
> >= 0 implies != -1, right?
>
> IOW?

Yes, Your code is better.

>
> diff --git a/drivers/edac/fsl_ddr_edac.c b/drivers/edac/fsl_ddr_edac.c
> index 846a4ba25342..fe822cb9b562 100644
> --- a/drivers/edac/fsl_ddr_edac.c
> +++ b/drivers/edac/fsl_ddr_edac.c
> @@ -328,24 +328,21 @@ static void fsl_mc_check(struct mem_ctl_info *mci)
>  	 * TODO: Add support for 32-bit wide buses
>  	 */
>  	if ((err_detect & DDR_EDE_SBE) && (bus_width == 64)) {
> -		u64 cap = (u64)cap_high << 32 | (u64)cap_low;
> +		u64 cap = (u64)cap_high << 32 | cap_low;
>  		u32 s = syndrome;
>
>  		sbe_ecc_decode(cap_high, cap_low, syndrome,
>  				&bad_data_bit, &bad_ecc_bit);
>
> -		if (bad_data_bit != -1)
> -			fsl_mc_printk(mci, KERN_ERR,
> -				"Faulty Data bit: %d\n", bad_data_bit);
> -		if (bad_ecc_bit != -1)
> -			fsl_mc_printk(mci, KERN_ERR,
> -				"Faulty ECC bit: %d\n", bad_ecc_bit);
> -
> -		if (bad_data_bit >= 0)
> +		if (bad_data_bit >= 0) {
> +			fsl_mc_printk(mci, KERN_ERR, "Faulty Data bit: %d\n", bad_data_bit);
>  			cap ^= 1ULL << bad_data_bit;
> +		}
>
> -		if (bad_ecc_bit >= 0)
> +		if (bad_ecc_bit >= 0) {
> +			fsl_mc_printk(mci, KERN_ERR, "Faulty ECC bit: %d\n", bad_ecc_bit);
>  			s ^= 1 << bad_ecc_bit;
> +		}
>
>  		fsl_mc_printk(mci, KERN_ERR,
>  			"Expected Data / ECC:\t%#8.8x_%08x / %#2.2x\n",
>
> --
> Regards/Gruss,
>     Boris.
>
> https://people.kernel.org/tglx/notes-about-netiquette




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux