On 09/10/2024 13:15, Shu-hsiang Yang wrote: > 1. Add camera isp7x module device document > 2. Add camera interface device document > > Signed-off-by: Shu-hsiang Yang <Shu-hsiang.Yang@xxxxxxxxxxxx> > --- > .../media/mediatek/mediatek,cam-raw.yaml | 169 ++++++++++++++++++ > .../media/mediatek/mediatek,cam-yuv.yaml | 148 +++++++++++++++ > .../media/mediatek/mediatek,camisp.yaml | 71 ++++++++ > .../media/mediatek/mediatek,seninf-core.yaml | 106 +++++++++++ > .../media/mediatek/mediatek,seninf.yaml | 88 +++++++++ > 5 files changed, 582 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/mediatek/mediatek,cam-raw.yaml > create mode 100644 Documentation/devicetree/bindings/media/mediatek/mediatek,cam-yuv.yaml > create mode 100644 Documentation/devicetree/bindings/media/mediatek/mediatek,camisp.yaml > create mode 100644 Documentation/devicetree/bindings/media/mediatek/mediatek,seninf-core.yaml > create mode 100644 Documentation/devicetree/bindings/media/mediatek/mediatek,seninf.yaml > > diff --git a/Documentation/devicetree/bindings/media/mediatek/mediatek,cam-raw.yaml b/Documentation/devicetree/bindings/media/mediatek/mediatek,cam-raw.yaml > new file mode 100644 > index 000000000000..c709e4bf0a18 > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/mediatek/mediatek,cam-raw.yaml > @@ -0,0 +1,169 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +# Copyright (c) 2024 MediaTek Inc. > + Drop blank line > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/media/mediatek/mediatek,cam-raw.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: The cam-raw unit of MediaTek ISP system > + > +maintainers: > + - Shu-hsiang Yang <shu-hsiang.yang@xxxxxxxxxxxx> > + - Shun-yi Wang <shun-yi.wang@xxxxxxxxxxxx> > + - Teddy Chen <teddy.chen@xxxxxxxxxxxx> > + > +description: > + MediaTek cam-raw is the camera RAW processing unit in MediaTek SoC. > + > +properties: > + compatible: > + const: mediatek,cam-raw SoC specific compatible instead. I see Rob gave you review, so few more points. ... > + > + assigned-clocks: > + maxItems: 1 > + > + assigned-clock-parents: > + maxItems: 1 Drop assigned-clock* > + > + iommus: > + description: > + Points to the respective IOMMU block with master port as argument, see > + Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details. > + Ports are according to the HW. > + minItems: 1 > + maxItems: 32 > + > +required: > + - compatible > + - reg > + - reg-names > + - interrupts > + - power-domains > + - clocks > + - clock-names > + - iommus > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/interrupt-controller/irq.h> > + #include <dt-bindings/power/mediatek,mt8188-power.h> > + #include <dt-bindings/clock/mediatek,mt8188-clk.h> > + #include <dt-bindings/memory/mediatek,mt8188-memory-port.h> > + > + soc { > + #address-cells = <2>; > + #size-cells = <2>; > + > + cam_raw_a@16030000 { Node names should be generic. See also an explanation and list of examples (not exhaustive) in DT specification: https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation e.g. isp Also, underscores are not allowed in node names. Please do not send to us your downstream code. Read DTS coding style and write code maching upstream style. > + compatible = "mediatek,cam-raw"; > + reg = <0 0x16030000 0 0x8000>, > + <0 0x16038000 0 0x8000>; > + reg-names = "base", "inner_base"; > + mediatek,cam-id = <0>; > + mediatek,larbs = <&larb16a>; > + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH 0>; > + #address-cells = <2>; > + #size-cells = <2>; > + dma-ranges = <0x2 0x0 0x0 0x40000000 0x1 0x0>; > + power-domains = <&spm MT8188_POWER_DOMAIN_CAM_SUBA>; > + clocks = <&camsys CLK_CAM_MAIN_CAM2MM0_GALS>, > + <&camsys CLK_CAM_MAIN_CAM2MM1_GALS>, > + <&camsys CLK_CAM_MAIN_CAM2SYS_GALS>, > + <&camsys CLK_CAM_MAIN_CAM>, > + <&camsys CLK_CAM_MAIN_CAMTG>, > + <&camsys_rawa CLK_CAM_RAWA_LARBX>, > + <&camsys_rawa CLK_CAM_RAWA_CAM>, > + <&camsys_rawa CLK_CAM_RAWA_CAMTG>, > + <&topckgen CLK_TOP_CAM>, > + <&topckgen CLK_TOP_CAMTG>, > + <&topckgen CLK_TOP_CAMTM>; Messed alignment. > + clock-names = "camsys_cam2mm0_cgpdn", > + "camsys_cam2mm1_cgpdn", > + "camsys_cam2sys_cgpdn", > + "camsys_cam_cgpdn", > + "camsys_camtg_cgpdn", > + "camsys_rawa_larbx_cgpdn", > + "camsys_rawa_cam_cgpdn", > + "camsys_rawa_camtg_cgpdn", > + "topckgen_top_cam", > + "topckgen_top_camtg", > + "topckgen_top_camtm"; Also misaligned. > + assigned-clocks = <&topckgen CLK_TOP_CAM>; > + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5>; > + iommus = <&vpp_iommu M4U_PORT_L16A_IMGO_R1>, > + <&vpp_iommu M4U_PORT_L16A_CQI_R1>, Also misaligned. All comments apply to other files as well. Best regards, Krzysztof
