From: Richard Zhu <hongxing.zhu@xxxxxxx> Add PCIe support for i.MX8QXP, i.MX8QM and i.MX8DXL. Add SATA support for i.MX8QM, which is in hsio subsystem and is shared with PCIe PHY. Signed-off-by: Richard Zhu <hongxing.zhu@xxxxxxx> Signed-off-by: Frank Li <Frank.Li@xxxxxxx> --- Change from v2 to v3 - move fsl,max-link-speed after common property - Add sata description at commit message. - Fix hsio bus's range overlaps Change from v1 to v2 - none On going discussion: https://lore.kernel.org/imx/20240930-pci_fixup_addr-v3-2-80ee70352fc7@xxxxxxx/ don't affect this dts. This work for with/without above patches. --- .../boot/dts/freescale/imx8-ss-hsio.dtsi | 123 +++++++++++ .../boot/dts/freescale/imx8dxl-ss-hsio.dtsi | 52 +++++ arch/arm64/boot/dts/freescale/imx8dxl.dtsi | 2 + .../boot/dts/freescale/imx8qm-ss-hsio.dtsi | 209 ++++++++++++++++++ arch/arm64/boot/dts/freescale/imx8qm.dtsi | 2 + .../boot/dts/freescale/imx8qxp-ss-hsio.dtsi | 41 ++++ arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 2 + 7 files changed, 431 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-hsio.dtsi create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-hsio.dtsi create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-ss-hsio.dtsi create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-ss-hsio.dtsi diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-hsio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-hsio.dtsi new file mode 100644 index 0000000000000..70a8aa1a67911 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8-ss-hsio.dtsi @@ -0,0 +1,123 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2024 NXP + * + * Richard Zhu <hongxing.zhu@xxxxxxx> + */ +#include <dt-bindings/phy/phy.h> + +hsio_axi_clk: clock-hsio-axi { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <400000000>; + clock-output-names = "hsio_axi_clk"; +}; + +hsio_per_clk: clock-hsio-per { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <133333333>; + clock-output-names = "hsio_per_clk"; +}; + +hsio_refa_clk: clock-hsio-refa { + compatible = "gpio-gate-clock"; + clocks = <&xtal100m>; + #clock-cells = <0>; + enable-gpios = <&lsio_gpio4 27 GPIO_ACTIVE_LOW>; +}; + +hsio_refb_clk: clock-hsio-refb { + compatible = "gpio-gate-clock"; + clocks = <&xtal100m>; + #clock-cells = <0>; + enable-gpios = <&lsio_gpio4 1 GPIO_ACTIVE_LOW>; +}; + +xtal100m: clock-xtal100m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "xtal_100MHz"; +}; + +hsio_subsys: bus@5f000000 { + compatible = "simple-bus"; + ranges = <0x5f000000 0x0 0x5f000000 0x01000000>, + <0x80000000 0x0 0x70000000 0x10000000>; + #address-cells = <1>; + #size-cells = <1>; + dma-ranges = <0x80000000 0 0x80000000 0x80000000>; + + pcieb: pcie@5f010000 { + compatible = "fsl,imx8q-pcie"; + reg = <0x5f010000 0x10000>, + <0x8ff00000 0x80000>; + reg-names = "dbi", "config"; + ranges = <0x81000000 0 0x00000000 0x8ff80000 0 0x00010000>, + <0x82000000 0 0x80000000 0x80000000 0 0x0ff00000>; + #interrupt-cells = <1>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #address-cells = <3>; + #size-cells = <2>; + clocks = <&pcieb_lpcg IMX_LPCG_CLK_6>, + <&pcieb_lpcg IMX_LPCG_CLK_4>, + <&pcieb_lpcg IMX_LPCG_CLK_5>; + clock-names = "dbi", "mstr", "slv"; + bus-range = <0x00 0xff>; + device_type = "pci"; + interrupt-map = <0 0 0 1 &gic 0 105 4>, + <0 0 0 2 &gic 0 106 4>, + <0 0 0 3 &gic 0 107 4>, + <0 0 0 4 &gic 0 108 4>; + interrupt-map-mask = <0 0 0 0x7>; + num-lanes = <1>; + num-viewport = <4>; + power-domains = <&pd IMX_SC_R_PCIE_B>; + fsl,max-link-speed = <3>; + status = "disabled"; + }; + + pcieb_lpcg: clock-controller@5f060000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5f060000 0x10000>; + clocks = <&hsio_axi_clk>, <&hsio_axi_clk>, <&hsio_axi_clk>; + #clock-cells = <1>; + clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>, <IMX_LPCG_CLK_6>; + clock-output-names = "hsio_pcieb_mstr_axi_clk", + "hsio_pcieb_slv_axi_clk", + "hsio_pcieb_dbi_axi_clk"; + power-domains = <&pd IMX_SC_R_PCIE_B>; + }; + + phyx1_crr1_lpcg: clock-controller@5f0b0000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5f0b0000 0x10000>; + clocks = <&hsio_per_clk>; + #clock-cells = <1>; + clock-indices = <IMX_LPCG_CLK_4>; + clock-output-names = "hsio_phyx1_per_clk"; + power-domains = <&pd IMX_SC_R_SERDES_1>; + }; + + pcieb_crr3_lpcg: clock-controller@5f0d0000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5f0d0000 0x10000>; + clocks = <&hsio_per_clk>; + #clock-cells = <1>; + clock-indices = <IMX_LPCG_CLK_4>; + clock-output-names = "hsio_pcieb_per_clk"; + power-domains = <&pd IMX_SC_R_PCIE_B>; + }; + + misc_crr5_lpcg: clock-controller@5f0f0000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5f0f0000 0x10000>; + clocks = <&hsio_per_clk>; + #clock-cells = <1>; + clock-indices = <IMX_LPCG_CLK_4>; + clock-output-names = "hsio_misc_per_clk"; + power-domains = <&pd IMX_SC_R_HSIO_GPIO>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-hsio.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-hsio.dtsi new file mode 100644 index 0000000000000..f3104e205ae89 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-hsio.dtsi @@ -0,0 +1,52 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2024 NXP + */ + +&hsio_subsys { + phyx1_lpcg: clock-controller@5f090000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5f090000 0x10000>; + clocks = <&hsio_refb_clk>, <&hsio_per_clk>, + <&hsio_per_clk>, <&hsio_per_clk>; + #clock-cells = <1>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, + <IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_4>; + clock-output-names = "hsio_phyx1_pclk", + "hsio_phyx1_epcs_tx_clk", + "hsio_phyx1_epcs_rx_clk", + "hsio_phyx1_apb_clk"; + power-domains = <&pd IMX_SC_R_SERDES_1>; + }; + + hsio_phy: phy@5f1a0000 { + compatible = "fsl,imx8qxp-hsio"; + reg = <0x5f1a0000 0x10000>, + <0x5f120000 0x10000>, + <0x5f140000 0x10000>, + <0x5f160000 0x10000>; + reg-names = "reg", "phy", "ctrl", "misc"; + clocks = <&phyx1_lpcg IMX_LPCG_CLK_0>, + <&phyx1_lpcg IMX_LPCG_CLK_4>, + <&phyx1_crr1_lpcg IMX_LPCG_CLK_4>, + <&pcieb_crr3_lpcg IMX_LPCG_CLK_4>, + <&misc_crr5_lpcg IMX_LPCG_CLK_4>; + clock-names = "pclk0", "apb_pclk0", "phy0_crr", "ctl0_crr", + "misc_crr"; + #phy-cells = <3>; + power-domains = <&pd IMX_SC_R_SERDES_1>; + status = "disabled"; + }; +}; + +&pcieb { + #interrupt-cells = <1>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + interrupt-map = <0 0 0 1 &gic 0 47 4>, + <0 0 0 2 &gic 0 48 4>, + <0 0 0 3 &gic 0 49 4>, + <0 0 0 4 &gic 0 50 4>; + interrupt-map-mask = <0 0 0 0x7>; +}; + diff --git a/arch/arm64/boot/dts/freescale/imx8dxl.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi index 7e54cf2028580..76de3db8b9423 100644 --- a/arch/arm64/boot/dts/freescale/imx8dxl.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi @@ -237,12 +237,14 @@ xtal24m: clock-xtal24m { #include "imx8-ss-conn.dtsi" #include "imx8-ss-ddr.dtsi" #include "imx8-ss-lsio.dtsi" + #include "imx8-ss-hsio.dtsi" }; #include "imx8dxl-ss-adma.dtsi" #include "imx8dxl-ss-conn.dtsi" #include "imx8dxl-ss-lsio.dtsi" #include "imx8dxl-ss-ddr.dtsi" +#include "imx8dxl-ss-hsio.dtsi" &cm40_intmux { interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-hsio.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-hsio.dtsi new file mode 100644 index 0000000000000..d24d90955c35a --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-hsio.dtsi @@ -0,0 +1,209 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2024 NXP + * Richard Zhu <hongxing.zhu@xxxxxxx> + */ + +&hsio_subsys { + compatible = "simple-bus"; + ranges = <0x5f000000 0x0 0x5f000000 0x01000000>, + <0x40000000 0x0 0x60000000 0x10000000>, + <0x80000000 0x0 0x70000000 0x10000000>; + #address-cells = <1>; + #size-cells = <1>; + + pciea: pcie@5f000000 { + compatible = "fsl,imx8q-pcie"; + reg = <0x5f000000 0x10000>, + <0x4ff00000 0x80000>; + reg-names = "dbi", "config"; + ranges = <0x81000000 0 0x00000000 0x4ff80000 0 0x00010000>, + <0x82000000 0 0x40000000 0x40000000 0 0x0ff00000>; + #interrupt-cells = <1>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #address-cells = <3>; + #size-cells = <2>; + clocks = <&pciea_lpcg 2>, + <&pciea_lpcg 0>, + <&pciea_lpcg 1>; + clock-names = "dbi", "mstr", "slv"; + bus-range = <0x00 0xff>; + device_type = "pci"; + interrupt-map = <0 0 0 1 &gic 0 73 4>, + <0 0 0 2 &gic 0 74 4>, + <0 0 0 3 &gic 0 75 4>, + <0 0 0 4 &gic 0 76 4>; + interrupt-map-mask = <0 0 0 0x7>; + num-lanes = <1>; + num-viewport = <4>; + power-domains = <&pd IMX_SC_R_PCIE_A>; + fsl,max-link-speed = <3>; + status = "disabled"; + }; + + pcieb: pcie@5f010000 { + compatible = "fsl,imx8q-pcie"; + reg = <0x5f010000 0x10000>, + <0x8ff00000 0x80000>; + reg-names = "dbi", "config"; + ranges = <0x81000000 0 0x00000000 0x8ff80000 0 0x00010000>, + <0x82000000 0 0x80000000 0x80000000 0 0x0ff00000>; + #interrupt-cells = <1>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #address-cells = <3>; + #size-cells = <2>; + clocks = <&pcieb_lpcg 2>, + <&pcieb_lpcg 0>, + <&pcieb_lpcg 1>; + clock-names = "dbi", "mstr", "slv"; + bus-range = <0x00 0xff>; + device_type = "pci"; + interrupt-map = <0 0 0 1 &gic 0 105 4>, + <0 0 0 2 &gic 0 106 4>, + <0 0 0 3 &gic 0 107 4>, + <0 0 0 4 &gic 0 108 4>; + interrupt-map-mask = <0 0 0 0x7>; + num-lanes = <1>; + num-viewport = <4>; + power-domains = <&pd IMX_SC_R_PCIE_B>; + fsl,max-link-speed = <3>; + status = "disabled"; + }; + + sata: sata@5f020000 { + compatible = "fsl,imx8qm-ahci"; + reg = <0x5f020000 0x10000>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sata_lpcg 0>, + <&sata_crr4_lpcg 0>; + clock-names = "sata", "sata_ref"; + phy-names = "sata-phy", "cali-phy0", "cali-phy1"; + power-domains = <&pd IMX_SC_R_SATA_0>; + /* + * Since "REXT" pin is only present for first lane PHY + * and its calibration result will be stored, and shared + * by the PHY used by SATA. + * + * Add the calibration PHYs for SATA here, although only + * the third lane PHY is used by SATA. + */ + phys = <&hsio_phy 2 PHY_TYPE_SATA 0>, + <&hsio_phy 0 PHY_TYPE_PCIE 0>, + <&hsio_phy 1 PHY_TYPE_PCIE 1>; + status = "disabled"; + }; + + pciea_lpcg: clock-controller@5f050000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5f050000 0x10000>; + clocks = <&hsio_axi_clk>, <&hsio_axi_clk>, <&hsio_axi_clk>; + #clock-cells = <1>; + clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>, <IMX_LPCG_CLK_6>; + clock-output-names = "hsio_pciea_mstr_axi_clk", + "hsio_pciea_slv_axi_clk", + "hsio_pciea_dbi_axi_clk"; + power-domains = <&pd IMX_SC_R_PCIE_A>; + }; + + sata_lpcg: clock-controller@5f070000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5f070000 0x10000>; + clocks = <&hsio_axi_clk>; + #clock-cells = <1>; + clock-indices = <IMX_LPCG_CLK_4>; + clock-output-names = "hsio_sata_clk"; + power-domains = <&pd IMX_SC_R_SATA_0>; + }; + + phyx2_lpcg: clock-controller@5f080000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5f080000 0x10000>; + clocks = <&hsio_refa_clk>, <&hsio_per_clk>, + <&hsio_refa_clk>, <&hsio_per_clk>; + #clock-cells = <1>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, + <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>; + clock-output-names = "hsio_phyx2_pclk_0", + "hsio_phyx2_pclk_1", + "hsio_phyx2_apbclk_0", + "hsio_phyx2_apbclk_1"; + power-domains = <&pd IMX_SC_R_SERDES_0>; + }; + + phyx1_lpcg: clock-controller@5f090000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5f090000 0x10000>; + clocks = <&hsio_refa_clk>, <&hsio_per_clk>, + <&hsio_per_clk>, <&hsio_per_clk>; + #clock-cells = <1>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, + <IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_4>; + clock-output-names = "hsio_phyx1_pclk", + "hsio_phyx1_epcs_tx_clk", + "hsio_phyx1_epcs_rx_clk", + "hsio_phyx1_apb_clk"; + power-domains = <&pd IMX_SC_R_SERDES_1>; + }; + + phyx2_crr0_lpcg: clock-controller@5f0a0000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5f0a0000 0x10000>; + clocks = <&hsio_per_clk>; + #clock-cells = <1>; + clock-indices = <IMX_LPCG_CLK_4>; + clock-output-names = "hsio_phyx2_per_clk"; + power-domains = <&pd IMX_SC_R_SERDES_0>; + }; + + pciea_crr2_lpcg: clock-controller@5f0c0000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5f0c0000 0x10000>; + clocks = <&hsio_per_clk>; + #clock-cells = <1>; + clock-indices = <IMX_LPCG_CLK_4>; + clock-output-names = "hsio_pciea_per_clk"; + power-domains = <&pd IMX_SC_R_PCIE_A>; + }; + + sata_crr4_lpcg: clock-controller@5f0e0000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5f0e0000 0x10000>; + clocks = <&hsio_per_clk>; + #clock-cells = <1>; + clock-indices = <IMX_LPCG_CLK_4>; + clock-output-names = "hsio_sata_per_clk"; + power-domains = <&pd IMX_SC_R_SATA_0>; + }; + + hsio_phy: phy@5f180000 { + compatible = "fsl,imx8qm-hsio"; + reg = <0x5f180000 0x30000>, + <0x5f110000 0x20000>, + <0x5f130000 0x30000>, + <0x5f160000 0x10000>; + reg-names = "reg", "phy", "ctrl", "misc"; + clocks = <&phyx2_lpcg IMX_LPCG_CLK_0>, + <&phyx2_lpcg IMX_LPCG_CLK_1>, + <&phyx2_lpcg IMX_LPCG_CLK_4>, + <&phyx2_lpcg IMX_LPCG_CLK_5>, + <&phyx1_lpcg IMX_LPCG_CLK_0>, + <&phyx1_lpcg IMX_LPCG_CLK_1>, + <&phyx1_lpcg IMX_LPCG_CLK_2>, + <&phyx1_lpcg IMX_LPCG_CLK_4>, + <&phyx2_crr0_lpcg IMX_LPCG_CLK_4>, + <&phyx1_crr1_lpcg IMX_LPCG_CLK_4>, + <&pciea_crr2_lpcg IMX_LPCG_CLK_4>, + <&pcieb_crr3_lpcg IMX_LPCG_CLK_4>, + <&sata_crr4_lpcg IMX_LPCG_CLK_4>, + <&misc_crr5_lpcg IMX_LPCG_CLK_4>; + clock-names = "pclk0", "pclk1", "apb_pclk0", "apb_pclk1", + "pclk2", "epcs_tx", "epcs_rx", "apb_pclk2", + "phy0_crr", "phy1_crr", "ctl0_crr", + "ctl1_crr", "ctl2_crr", "misc_crr"; + #phy-cells = <3>; + power-domains = <&pd IMX_SC_R_SERDES_0>, <&pd IMX_SC_R_SERDES_1>; + status = "disabled"; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi index 3ee6e2869e3cf..ac9064a949d82 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi @@ -594,6 +594,7 @@ mipi_pll_div2_clk: clock-controller-mipi-div2-pll { #include "imx8-ss-dma.dtsi" #include "imx8-ss-conn.dtsi" #include "imx8-ss-lsio.dtsi" + #include "imx8-ss-hsio.dtsi" }; #include "imx8qm-ss-img.dtsi" @@ -603,3 +604,4 @@ mipi_pll_div2_clk: clock-controller-mipi-div2-pll { #include "imx8qm-ss-audio.dtsi" #include "imx8qm-ss-lvds.dtsi" #include "imx8qm-ss-mipi.dtsi" +#include "imx8qm-ss-hsio.dtsi" diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-hsio.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-hsio.dtsi new file mode 100644 index 0000000000000..47fc6e0cff4a1 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-hsio.dtsi @@ -0,0 +1,41 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2024 NXP + * Richard Zhu <hongxing.zhu@xxxxxxx> + */ + +&hsio_subsys { + phyx1_lpcg: clock-controller@5f090000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5f090000 0x10000>; + clocks = <&hsio_refb_clk>, <&hsio_per_clk>, + <&hsio_per_clk>, <&hsio_per_clk>; + #clock-cells = <1>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, + <IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_4>; + clock-output-names = "hsio_phyx1_pclk", + "hsio_phyx1_epcs_tx_clk", + "hsio_phyx1_epcs_rx_clk", + "hsio_phyx1_apb_clk"; + power-domains = <&pd IMX_SC_R_SERDES_1>; + }; + + hsio_phy: phy@5f1a0000 { + compatible = "fsl,imx8qxp-hsio"; + reg = <0x5f1a0000 0x10000>, + <0x5f120000 0x10000>, + <0x5f140000 0x10000>, + <0x5f160000 0x10000>; + reg-names = "reg", "phy", "ctrl", "misc"; + clocks = <&phyx1_lpcg IMX_LPCG_CLK_0>, + <&phyx1_lpcg IMX_LPCG_CLK_1>, + <&phyx1_crr1_lpcg IMX_LPCG_CLK_4>, + <&pcieb_crr3_lpcg IMX_LPCG_CLK_4>, + <&misc_crr5_lpcg IMX_LPCG_CLK_4>; + clock-names = "pclk0", "apb_pclk0", "phy0_crr", "ctl0_crr", + "misc_crr"; + #phy-cells = <3>; + power-domains = <&pd IMX_SC_R_SERDES_1>; + status = "disabled"; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi index 0313f295de2e9..db21c6d64f24d 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi @@ -323,6 +323,7 @@ map0 { #include "imx8-ss-conn.dtsi" #include "imx8-ss-ddr.dtsi" #include "imx8-ss-lsio.dtsi" + #include "imx8-ss-hsio.dtsi" }; #include "imx8qxp-ss-img.dtsi" @@ -330,3 +331,4 @@ map0 { #include "imx8qxp-ss-adma.dtsi" #include "imx8qxp-ss-conn.dtsi" #include "imx8qxp-ss-lsio.dtsi" +#include "imx8qxp-ss-hsio.dtsi" -- 2.34.1
