Fix anatop thermal related dtbs_check warnings about node name
and missing thermal-cells property.
Signed-off-by: Andreas Kemnade <andreas@xxxxxxxxxxxx>
---
arch/arm/boot/dts/nxp/imx/imx6sll.dtsi | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi
index ddeb5b37fb78b..85fe2a4ab97a0 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi
@@ -525,7 +525,7 @@ reg_3p0: regulator-3p0@20c8120 {
anatop-enable-bit = <0>;
};
- tempmon: temperature-sensor {
+ tempmon: tempmon {
compatible = "fsl,imx6sll-tempmon", "fsl,imx6sx-tempmon";
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gpc>;
@@ -533,6 +533,7 @@ tempmon: temperature-sensor {
nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
nvmem-cell-names = "calib", "temp_grade";
clocks = <&clks IMX6SLL_CLK_PLL3_USB_OTG>;
+ #thermal-sensor-cells = <0>;
};
};
--
2.39.5
