Extend the USB+DP combo QMP PHY driver to support the SAR2130P platform.
It mosly follows the SM8550 QMP PHY, but the QSERDES programming
differs, most likely because of the parent clock rate differences.
NOTE: The DP part wasn't yet tested, but it is not possible to support
just the USB part of the PHY. DP part might require additional fixes
later.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 100 ++++++++++++++++++++++++++++++
1 file changed, 100 insertions(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 643045c9024eaa5de81f64ecfd10ff8845faf120..05ec1a0226460d23873db1dfe9dcbc6ce1953b2e 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -400,6 +400,57 @@ static const struct qmp_phy_init_tbl qmp_v3_usb3_pcs_tbl[] = {
QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
};
+static const struct qmp_phy_init_tbl sar2130p_usb3_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE1_MODE1, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE2_MODE1, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE1, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_CORECLK_DIV_MODE1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE1, 0x2e),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE1, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MSB_MODE1, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START1_MODE1, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START2_MODE1, 0xd5),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START3_MODE1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_SEL_1, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE1_MODE1, 0x25),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE2_MODE1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xb7),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xb7),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE2_MODE0, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE0, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MSB_MODE0, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START2_MODE0, 0xd5),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START3_MODE0, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE1_MODE0, 0x25),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE2_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_BG_TIMER, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_SYSCLK_BUF_ENABLE, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_SYSCLK_EN_SEL, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP_CFG, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_CORE_CLK_EN, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_CONFIG_1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_AUTO_GAIN_ADJ_CTRL_1, 0xb6),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_AUTO_GAIN_ADJ_CTRL_2, 0x4b),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_AUTO_GAIN_ADJ_CTRL_3, 0x37),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_ADDITIONAL_MISC, 0x0c),
+};
+
static const struct qmp_phy_init_tbl sm6350_usb3_rx_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
@@ -1730,6 +1781,51 @@ static const struct qmp_combo_offsets qmp_combo_offsets_v5 = {
.dp_dp_phy = 0x2200,
};
+static const struct qmp_phy_cfg sar2130p_usb3dpphy_cfg = {
+ .offsets = &qmp_combo_offsets_v3,
+
+ .serdes_tbl = sar2130p_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sar2130p_usb3_serdes_tbl),
+ .tx_tbl = sm8550_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8550_usb3_tx_tbl),
+ .rx_tbl = sm8550_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8550_usb3_rx_tbl),
+ .pcs_tbl = sm8550_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8550_usb3_pcs_tbl),
+ .pcs_usb_tbl = sm8550_usb3_pcs_usb_tbl,
+ .pcs_usb_tbl_num = ARRAY_SIZE(sm8550_usb3_pcs_usb_tbl),
+
+ .dp_serdes_tbl = qmp_v6_dp_serdes_tbl,
+ .dp_serdes_tbl_num = ARRAY_SIZE(qmp_v6_dp_serdes_tbl),
+ .dp_tx_tbl = qmp_v6_dp_tx_tbl,
+ .dp_tx_tbl_num = ARRAY_SIZE(qmp_v6_dp_tx_tbl),
+
+ .serdes_tbl_rbr = qmp_v6_dp_serdes_tbl_rbr,
+ .serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v6_dp_serdes_tbl_rbr),
+ .serdes_tbl_hbr = qmp_v6_dp_serdes_tbl_hbr,
+ .serdes_tbl_hbr_num = ARRAY_SIZE(qmp_v6_dp_serdes_tbl_hbr),
+ .serdes_tbl_hbr2 = qmp_v6_dp_serdes_tbl_hbr2,
+ .serdes_tbl_hbr2_num = ARRAY_SIZE(qmp_v6_dp_serdes_tbl_hbr2),
+ .serdes_tbl_hbr3 = qmp_v6_dp_serdes_tbl_hbr3,
+ .serdes_tbl_hbr3_num = ARRAY_SIZE(qmp_v6_dp_serdes_tbl_hbr3),
+
+ .swing_hbr_rbr = &qmp_dp_v5_voltage_swing_hbr_rbr,
+ .pre_emphasis_hbr_rbr = &qmp_dp_v6_pre_emphasis_hbr_rbr,
+ .swing_hbr3_hbr2 = &qmp_dp_v5_voltage_swing_hbr3_hbr2,
+ .pre_emphasis_hbr3_hbr2 = &qmp_dp_v5_pre_emphasis_hbr3_hbr2,
+
+ .dp_aux_init = qmp_v4_dp_aux_init,
+ .configure_dp_tx = qmp_v4_configure_dp_tx,
+ .configure_dp_phy = qmp_v4_configure_dp_phy,
+ .calibrate_dp_phy = qmp_v4_calibrate_dp_phy,
+
+ .regs = qmp_v6_usb3phy_regs_layout,
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+};
+
static const struct qmp_phy_cfg sc7180_usb3dpphy_cfg = {
.offsets = &qmp_combo_offsets_v3,
@@ -3767,6 +3863,10 @@ static int qmp_combo_probe(struct platform_device *pdev)
}
static const struct of_device_id qmp_combo_of_match_table[] = {
+ {
+ .compatible = "qcom,sar2130p-qmp-usb3-dp-phy",
+ .data = &sar2130p_usb3dpphy_cfg,
+ },
{
.compatible = "qcom,sc7180-qmp-usb3-dp-phy",
.data = &sc7180_usb3dpphy_cfg,
