Hi Arnd,
Please pull these thead dts changes. I've run W=1 dtbs_check and they
have been in linux-next since October 15th.
Thanks,
Drew
The following changes since commit 8e929cb546ee42c9a61d24fae60605e9e3192354:
Linux 6.12-rc3 (2024-10-13 14:33:32 -0700)
are available in the Git repository at:
git@xxxxxxxxxx:pdp7/linux.git tags/thead-dt-for-v6.13
for you to fetch changes up to 2a3bf75a9408c40403aab39336274c8010b4c815:
riscv: dts: thead: remove enabled property for spi0 (2024-10-15 10:01:18 -0700)
----------------------------------------------------------------
T-HEAD Devicetrees for v6.13
Add nodes for pin controllers on the T-Head TH1520 RISC-V SoC. The
yaml binding and pinctrl-th1520 driver has been merged into next by
Linus W and will be included in the 6.13 pinctrl PR.
The TH1520 GPIO controllers are already supported by the gpio-dwapb
driver. This PR improves GPIO support by adding GPIO ranges and GPIO
line names for the BeagleV Ahead and LicheePi 4A boards. Support is
added for the built-in LEDs on the Ahead board.
Signed-off-by: Drew Fustini <drew@xxxxxxxx>
----------------------------------------------------------------
Drew Fustini (1):
riscv: dts: thead: remove enabled property for spi0
Emil Renner Berthing (7):
riscv: dts: thead: Add TH1520 pin control nodes
riscv: dts: thead: Add TH1520 GPIO ranges
riscv: dts: thead: Adjust TH1520 GPIO labels
riscv: dts: thead: Add Lichee Pi 4M GPIO line names
riscv: dts: thead: Add TH1520 pinctrl settings for UART0
riscv: dtb: thead: Add BeagleV Ahead LEDs
riscv: dts: thead: Add missing GPIO clock-names
arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts | 86 +++++++++++++++++++++-
.../boot/dts/thead/th1520-lichee-module-4a.dtsi | 39 ++++++++++
arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts | 30 +++++++-
arch/riscv/boot/dts/thead/th1520.dtsi | 70 ++++++++++++++----
4 files changed, 202 insertions(+), 23 deletions(-)
