New version of T-HEAD C920 implement a fully featured ACLINT[1] device (This core is used by Sophgo SG2044). This ACLINT device provides a SSWI field to support fast S-mode IPI. This SSWI device is like the MSWI device in CLINT/ACLINT, but for S-mode. The only thing is different from the draft is that the T-HEAD version SSWI needs to write 0 on the SSWI address to clear the IPI. Add full support for T-HEAD C900 SSWI device. [1] https://github.com/riscv/riscv-aclint Changed from v1: 1. patch 2: use computed reg offset to avoid uncessary reg additions when setting/clearing irq. 2. patch 2: fix mulitple format issues and improve some comments. 3. patch 2: disable cpu irq when CPU is stopped. Changed from v2: 1. patch 2: add SXSTATUS.CLINTEE check for T-HEAD cores. 2. patch 2: add select GENERIC_IRQ_IPI_MUX in Kconfig Inochi Amaoto (3): dt-bindings: interrupt-controller: Add Sophgo SG2044 ACLINT SSWI irqchip: add T-HEAD C900 ACLINT SSWI driver riscv: defconfig: Enable T-HEAD C900 ACLINT SSWI drivers .../thead,c900-aclint-sswi.yaml | 58 ++++++ arch/riscv/configs/defconfig | 1 + drivers/irqchip/Kconfig | 11 ++ drivers/irqchip/Makefile | 1 + drivers/irqchip/irq-thead-c900-aclint-sswi.c | 176 ++++++++++++++++++ include/linux/cpuhotplug.h | 1 + 6 files changed, 248 insertions(+) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/thead,c900-aclint-sswi.yaml create mode 100644 drivers/irqchip/irq-thead-c900-aclint-sswi.c -- 2.47.0
