Add bindings for the SerDes of the Realtek Otto platform. These are MIPS based network Switch SoCs with up to 52 ports divided into four different model lines. Changes in v4 - fixed addresses in example - missing firmware-name denotes "skip firmware" instead empty string - fixed reg porperty Changes in v3 - renamed to realtek,rtl8380m-serdes.yaml - removed parameter controlled-ports - verified with make dt_binding_check - recipient list according to get_maintainers Changes in v2: - new subject - removed patch command sequences - renamed parameter controlled-ports to realtek,controlled-ports Signed-off-by: Markus Stockhausen <markus.stockhausen@xxxxxx> --- .../bindings/phy/realtek,rtl8380m-serdes.yaml | 63 +++++++++++++++++++ 1 file changed, 63 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/realtek,rtl8380m-serdes.yaml diff --git a/Documentation/devicetree/bindings/phy/realtek,rtl8380m-serdes.yaml b/Documentation/devicetree/bindings/phy/realtek,rtl8380m-serdes.yaml new file mode 100644 index 000000000000..8ccb3a34b221 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/realtek,rtl8380m-serdes.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/realtek,rtl8380m-serdes.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Realtek Otto SerDes controller + +maintainers: + - Markus Stockhausen <markus.stockhausen@xxxxxx> + +description: + The MIPS based Realtek Switch SoCs of the Realtek RTL838x, RTL839x, RTL930x + and RTL931x series have multiple SerDes built in. They are linked to single, + quad or octa PHYs like the RTL8218B, RTL8218D or RTL8214FC and are one of + the integral part of the up-to-52-port switch architecture. Although these + SerDes controllers have common basics they are designed differently in the + SoC families. + +properties: + $nodename: + pattern: "^phy@[0-9a-f]+$" + + compatible: + items: + - enum: + - realtek,rtl8380m-serdes + - realtek,rtl8392m-serdes + - realtek,rtl9302b-serdes + - realtek,rtl9311-serdes + + reg: + maxItems: 1 + + "#phy-cells": + const: 4 + description: + The first number defines the SerDes to use. The second number a linked + SerDes. E.g. if a octa 1G PHY is attached to two QSGMII SerDes. The third + number is the first switch port this SerDes is working for, the fourth + number is the last switch port the SerDes is working for. + + firmware-name: + maxItems: 1 + description: + If present, name (or relative path) of the file within the firmware + search path containing the firmware image to patch the SerDes. + +required: + - compatible + - reg + - "#phy-cells" + +additionalProperties: false + +examples: + - | + serdes: phy@1b0003b0 { + compatible = "realtek,rtl9302b-serdes"; + reg = <0x1b0003b0 0x8>; + firmware-name = "zyxel-xgs1210-12-serdes.fw"; + #phy-cells = <4>; + }; -- 2.46.2
