> -----Original Message-----
> From: Rob Herring <robh@xxxxxxxxxx>
> Sent: 2024年10月16日 6:03
> To: Wei Fang <wei.fang@xxxxxxx>
> Cc: davem@xxxxxxxxxxxxx; edumazet@xxxxxxxxxx; kuba@xxxxxxxxxx;
> pabeni@xxxxxxxxxx; krzk+dt@xxxxxxxxxx; conor+dt@xxxxxxxxxx; Vladimir
> Oltean <vladimir.oltean@xxxxxxx>; Claudiu Manoil
> <claudiu.manoil@xxxxxxx>; Clark Wang <xiaoning.wang@xxxxxxx>; Frank Li
> <frank.li@xxxxxxx>; christophe.leroy@xxxxxxxxxx; linux@xxxxxxxxxxxxxxx;
> bhelgaas@xxxxxxxxxx; horms@xxxxxxxxxx; imx@xxxxxxxxxxxxxxx;
> netdev@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx;
> linux-kernel@xxxxxxxxxxxxxxx; linux-pci@xxxxxxxxxxxxxxx
> Subject: Re: [PATCH v2 net-next 03/13] dt-bindings: net: add bindings for NETC
> blocks control
>
> On Tue, Oct 15, 2024 at 08:58:31PM +0800, Wei Fang wrote:
> > Add bindings for NXP NETC blocks control. Usually, NETC has 2 blocks
> > of 64KB registers, integrated endpoint register block (IERB) and
> > privileged register block (PRB). IERB is used for pre-boot
> > initialization for all NETC devices, such as ENETC, Timer, EMIDO and
> > so on. And PRB controls
>
> EMIDO or EMDIO?
Sorry, it should be EMDIO.
>
> > global reset and global error handling for NETC. Moreover, for the
> > i.MX platform, there is also a NETCMIX block for link configuration,
> > such as MII protocol, PCS protocol, etc.
> >
> > Signed-off-by: Wei Fang <wei.fang@xxxxxxx>
> > ---
> > v2 changes:
> > 1. Rephrase the commit message.
> > 2. Change unevaluatedProperties to additionalProperties.
> > 3. Remove the useless lables from examples.
> > ---
> > .../bindings/net/nxp,netc-blk-ctrl.yaml | 107
> ++++++++++++++++++
> > 1 file changed, 107 insertions(+)
> > create mode 100644
> > Documentation/devicetree/bindings/net/nxp,netc-blk-ctrl.yaml
> >
> > diff --git
> > a/Documentation/devicetree/bindings/net/nxp,netc-blk-ctrl.yaml
> > b/Documentation/devicetree/bindings/net/nxp,netc-blk-ctrl.yaml
> > new file mode 100644
> > index 000000000000..18a6ccf6bc2e
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/net/nxp,netc-blk-ctrl.yaml
> > @@ -0,0 +1,107 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2
> > +---
> > +$id:
> > + clocks:
> > + items:
> > + - description: NETC system clock
>
> Just 'maxItems: 1' is enough. The description doesn't add much.
Okay, thanks.
> > +
> > + clock-names:
> > + items:
> > + - const: ipg_clk
>
> Just 'ipg'
>
Sure, I will change it.
> > +
> > + power-domains:
> > + maxItems: 1
> > +
> > +patternProperties:
> > + "^pcie@[0-9a-f]+$":
> > + $ref: /schemas/pci/host-generic-pci.yaml#
> > +
> > +required:
> > + - compatible
> > + - "#address-cells"
> > + - "#size-cells"
> > + - reg
> > + - reg-names
> > + - ranges
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + bus {
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > +
> > + netc-blk-ctrl@4cde0000 {
> > + compatible = "nxp,imx95-netc-blk-ctrl";
> > + reg = <0x0 0x4cde0000 0x0 0x10000>,
> > + <0x0 0x4cdf0000 0x0 0x10000>,
> > + <0x0 0x4c81000c 0x0 0x18>;
> > + reg-names = "ierb", "prb", "netcmix";
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > + ranges;
> > + clocks = <&scmi_clk 98>;
> > + clock-names = "ipg_clk";
> > + power-domains = <&scmi_devpd 18>;
> > +
> > + pcie@4cb00000 {
> > + compatible = "pci-host-ecam-generic";
> > + reg = <0x0 0x4cb00000 0x0 0x100000>;
> > + #address-cells = <3>;
> > + #size-cells = <2>;
> > + device_type = "pci";
> > + bus-range = <0x1 0x1>;
> > + ranges = <0x82000000 0x0 0x4cce0000 0x0
> 0x4cce0000 0x0 0x20000
> > + 0xc2000000 0x0 0x4cd10000 0x0
> 0x4cd10000
> > + 0x0 0x10000>;
> > +
> > + mdio@0,0 {
> > + compatible = "pci1131,ee00";
> > + reg = <0x010000 0 0 0 0>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + };
> > + };
> > + };
> > + };
> > --
> > 2.34.1
> >
