On 24-10-14 17:48:37, neil.armstrong@xxxxxxxxxx wrote:
> On 14/10/2024 16:14, Abel Vesa wrote:
> > The usb_2 controller has only a USB 2.0 PHY connected to it. There is no
> > USB 3.x PHY fot it. So since dual-role is not an option, explicitly set
> > the dr_mode to host to match the hardware.
>
> I don't follow, dual role is perfectly possible with USB2 only, where is the limitation ?
You're right. USB2 could be OTG.
Consider this patch dropped.
>
> Neil
>
> >
> > Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
> > ---
> > arch/arm64/boot/dts/qcom/x1e80100.dtsi | 1 +
> > 1 file changed, 1 insertion(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
> > index 0e6802c1d2d8375987c614ec69c440e2f38d25c6..4da13c8472392d842442193dc740027fa011ee1f 100644
> > --- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
> > @@ -4143,6 +4143,7 @@ usb_2_dwc3: usb@a200000 {
> > iommus = <&apps_smmu 0x14e0 0x0>;
> > phys = <&usb_2_hsphy>;
> > phy-names = "usb2-phy";
> > + dr_mode = "host";
> > maximum-speed = "high-speed";
> > ports {
> >
> > ---
> > base-commit: d61a00525464bfc5fe92c6ad713350988e492b88
> > change-id: 20241014-x1e80100-usb2-dwc3-set-dr-mode-host-35312d1d25b2
> >
> > Best regards,
>
Thanks for reviewing.
Abel
