The usb_2 controller has only a USB 2.0 PHY connected to it. There is no
USB 3.x PHY fot it. So since dual-role is not an option, explicitly set
the dr_mode to host to match the hardware.
Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/x1e80100.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
index 0e6802c1d2d8375987c614ec69c440e2f38d25c6..4da13c8472392d842442193dc740027fa011ee1f 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
@@ -4143,6 +4143,7 @@ usb_2_dwc3: usb@a200000 {
iommus = <&apps_smmu 0x14e0 0x0>;
phys = <&usb_2_hsphy>;
phy-names = "usb2-phy";
+ dr_mode = "host";
maximum-speed = "high-speed";
ports {
---
base-commit: d61a00525464bfc5fe92c6ad713350988e492b88
change-id: 20241014-x1e80100-usb2-dwc3-set-dr-mode-host-35312d1d25b2
Best regards,
--
Abel Vesa <abel.vesa@xxxxxxxxxx>
