This series aims at enabling USB on QCS615 which has 2 USB controllers. The primary controller is SuperSpeed capable and secondary one is High Speed only capable. The High Speed Phy is a QUSB2 phy and the SuperSpeed Phy is a QMP Uni Phy which supports non-concurrent DP. Device tree patches will sent separately after the SMMU node is acked [1] on upstream. DT Binding checks done on the binding patches. Bindings have been added only for the first controller. [1]: https://lore.kernel.org/all/20241011063112.19087-1-quic_qqzhou@xxxxxxxxxxx/ Krishna Kurapati (5): dt-bindings: usb: qcom,dwc3: Add QCS615 to USB DWC3 bindings dt-bindings: phy: qcom,qusb2: Add bindings for QCS615 dt-bindings: phy: qcom,msm8998-qmp-usb3-phy: Add support for QCS615 phy: qcom-qusb2: Add support for QCS615 phy: qcom: qmp-usbc: Add qmp configuration for QCS615 .../phy/qcom,msm8998-qmp-usb3-phy.yaml | 2 ++ .../bindings/phy/qcom,qusb2-phy.yaml | 1 + .../devicetree/bindings/usb/qcom,dwc3.yaml | 3 ++ drivers/phy/qualcomm/phy-qcom-qmp-usbc.c | 3 ++ drivers/phy/qualcomm/phy-qcom-qusb2.c | 29 +++++++++++++++++++ 5 files changed, 38 insertions(+) -- 2.34.1
