Hi, Shu-hsiang: On Wed, 2024-10-09 at 19:15 +0800, Shu-hsiang Yang wrote: > Add UAPI for MediaTek ISP platform, providing user-space > interfaces for the new camsys driver. > > Signed-off-by: Shu-hsiang Yang <Shu-hsiang.Yang@xxxxxxxxxxxx> > --- [snip] > + > +/* MTK ISP camsys controls */ > +#define V4L2_CID_MTK_CAM_USED_ENGINE_LIMIT (V4L2_CID_USER_MTK_CAM_BASE + 1) > +#define V4L2_CID_MTK_CAM_BIN_LIMIT (V4L2_CID_USER_MTK_CAM_BASE + 2) > +#define V4L2_CID_MTK_CAM_FRZ_LIMIT (V4L2_CID_USER_MTK_CAM_BASE + 3) > +#define V4L2_CID_MTK_CAM_RESOURCE_PLAN_POLICY (V4L2_CID_USER_MTK_CAM_BASE + 4) > +#define V4L2_CID_MTK_CAM_USED_ENGINE (V4L2_CID_USER_MTK_CAM_BASE + 5) > +#define V4L2_CID_MTK_CAM_BIN (V4L2_CID_USER_MTK_CAM_BASE + 6) > +#define V4L2_CID_MTK_CAM_FRZ (V4L2_CID_USER_MTK_CAM_BASE + 7) > +#define V4L2_CID_MTK_CAM_USED_ENGINE_TRY (V4L2_CID_USER_MTK_CAM_BASE + 8) > +#define V4L2_CID_MTK_CAM_BIN_TRY (V4L2_CID_USER_MTK_CAM_BASE + 9) > +#define V4L2_CID_MTK_CAM_FRZ_TRY (V4L2_CID_USER_MTK_CAM_BASE + 10) > +#define V4L2_CID_MTK_CAM_PIXEL_RATE (V4L2_CID_USER_MTK_CAM_BASE + 11) > +#define V4L2_CID_MTK_CAM_FEATURE (V4L2_CID_USER_MTK_CAM_BASE + 12) > +#define V4L2_CID_MTK_CAM_SYNC_ID (V4L2_CID_USER_MTK_CAM_BASE + 13) > +#define V4L2_CID_MTK_CAM_RAW_PATH_SELECT (V4L2_CID_USER_MTK_CAM_BASE + 14) > +#define V4L2_CID_MTK_CAM_HSF_EN (V4L2_CID_USER_MTK_CAM_BASE + 15) > +#define V4L2_CID_MTK_CAM_PDE_INFO (V4L2_CID_USER_MTK_CAM_BASE + 16) > +#define V4L2_CID_MTK_CAM_MSTREAM_EXPOSURE (V4L2_CID_USER_MTK_CAM_BASE + 17) > +#define V4L2_CID_MTK_CAM_RAW_RESOURCE_CALC (V4L2_CID_USER_MTK_CAM_BASE + 18) > +#define V4L2_CID_MTK_CAM_TG_FLASH_CFG (V4L2_CID_USER_MTK_CAM_BASE + 19) > +#define V4L2_CID_MTK_CAM_RAW_RESOURCE_UPDATE (V4L2_CID_USER_MTK_CAM_BASE + 20) > +#define V4L2_CID_MTK_CAM_CAMSYS_HW_MODE (V4L2_CID_USER_MTK_CAM_BASE + 21) > + Please give introduction of how to use these user space interface. Regards, CK
