On Fri, Oct 11, 2024 at 03:16:40PM +0200, Markus Schneider-Pargmann wrote:
> In some devices the pins of the m_can module can act as a wakeup source.
> This patch helps do that by connecting the PHY_WAKE WoL option to
> device_set_wakeup_enable. By marking this device as being wakeup
> enabled, this setting can be used by platform code to decide which
> sleep or poweroff mode to use.
>
> Also this prepares the driver for the next patch in which the pinctrl
> settings are changed depending on the desired wakeup source.
>
> Signed-off-by: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
> Reviewed-by: Andrew Lunn <andrew@xxxxxxx>
> ---
> drivers/net/can/m_can/m_can.c | 37 +++++++++++++++++++++++++++++++++++++
> 1 file changed, 37 insertions(+)
>
> diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
> index a978b960f1f1e1e8273216ff330ab789d0fd6d51..29accadc20de7e9efa509f14209cc62e599f03bb 100644
> --- a/drivers/net/can/m_can/m_can.c
> +++ b/drivers/net/can/m_can/m_can.c
> @@ -2185,6 +2185,36 @@ static int m_can_set_coalesce(struct net_device *dev,
> return 0;
> }
>
> +static void m_can_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
> +{
> + struct m_can_classdev *cdev = netdev_priv(dev);
> +
> + wol->supported = device_can_wakeup(cdev->dev) ? WAKE_PHY : 0;
> + wol->wolopts = device_may_wakeup(cdev->dev) ? WAKE_PHY : 0;
> +}
> +
> +static int m_can_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
> +{
> + struct m_can_classdev *cdev = netdev_priv(dev);
> + bool wol_enable = !!wol->wolopts & WAKE_PHY;
Hi Markus,
I suspect there is an order of operations issue here.
Should the line above be like this?
bool wol_enable = !!(wol->wolopts & WAKE_PHY);
> + int ret;
> +
> + if ((wol->wolopts & WAKE_PHY) != wol->wolopts)
> + return -EINVAL;
> +
> + if (wol_enable == device_may_wakeup(cdev->dev))
> + return 0;
> +
> + ret = device_set_wakeup_enable(cdev->dev, wol_enable);
> + if (ret) {
> + netdev_err(cdev->net, "Failed to set wakeup enable %pE\n",
> + ERR_PTR(ret));
> + return ret;
> + }
> +
> + return 0;
> +}
> +
...
