Hi, Shu-hsiang: On Wed, 2024-10-09 at 19:15 +0800, Shu-hsiang Yang wrote: > Introduces support for the sensor interface in the MediaTek SoC, > with the focus on CSI and stream control. The key functionalities > include parameter control, metering and maintaining status information, > interrupt handling, and debugging. These features ensure effective > management and debugging of the camera sensor interface hardware. > > Signed-off-by: Shu-hsiang Yang <Shu-hsiang.Yang@xxxxxxxxxxxx> > --- > .../isp_7x/camsys/mtk_csi_phy_2_0/Makefile | 5 + > .../mtk_csi_phy_2_0/mtk_cam-seninf-cammux.h | 911 ++++++ > .../mtk_cam-seninf-csi0-cphy.h | 69 + > .../mtk_cam-seninf-csi0-dphy.h | 139 + > .../mtk_cam-seninf-hw_phy_2_0.c | 2879 +++++++++++++++++ > .../mtk_cam-seninf-mipi-rx-ana-cdphy-csi0a.h | 257 ++ > .../mtk_cam-seninf-seninf1-csi2.h | 415 +++ > .../mtk_cam-seninf-seninf1-mux.h | 147 + > .../mtk_csi_phy_2_0/mtk_cam-seninf-seninf1.h | 47 + > .../mtk_csi_phy_2_0/mtk_cam-seninf-tg1.h | 49 + > .../mtk_csi_phy_2_0/mtk_cam-seninf-top-ctrl.h | 99 + Move the phy part to phy/mediatek/ folder. You could refer to phy/mediatek/phy-mtk-mipi-csi-0-5.c Regards, CK
