Hi Claudiu,
On Fri, Aug 30, 2024 at 3:02 PM Claudiu <claudiu.beznea@xxxxxxxxx> wrote:
> From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
>
> Add the DT node for the RTC IP available on the Renesas RZ/G3S SoC.
>
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
> ---
>
> Changes in v3:
> - added CPG clock, power domain, reset
> - and assigned-clocks, assigned-clock-parents to configure the
> VBATTCLK
> - included dt-bindings/clock/r9a08g045-vbattb.h
Thanks for your patch!
> --- a/arch/arm64/boot/dts/renesas/r9a08g045.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r9a08g045.dtsi
> @@ -160,6 +161,22 @@ i2c3: i2c@10090c00 {
> status = "disabled";
> };
>
> + rtc: rtc@1004ec00 {
Please insert this after serial@1004b800, to preserve sort order.
> + compatible = "renesas,r9a08g045-rtca3", "renesas,rz-rtca3";
> + reg = <0 0x1004ec00 0 0x400>;
> + interrupts = <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "alarm", "period", "carry";
> + clocks = <&cpg CPG_MOD R9A08G045_VBAT_BCLK>, <&vbattb VBATTB_VBATTCLK>;
> + clock-names = "bus", "counter";
> + assigned-clocks = <&vbattb VBATTB_MUX>;
> + assigned-clock-parents = <&vbattb VBATTB_XC>;
Don't the assigned-clock* properties belong in the board DTS?
In addition, I think they should be documented in the DT bindings,
and be made required, so board developers don't forget about them.
> + power-domains = <&cpg>;
> + resets = <&cpg R9A08G045_VBAT_BRESETN>;
> + status = "disabled";
> + };
> +
> vbattb: vbattb@1005c000 {
> compatible = "renesas,r9a08g045-vbattb";
> reg = <0 0x1005c000 0 0x1000>;
The rest LGTM.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
