On 2024/9/3 20:18, Mao Jinlong wrote:
The QCOM extended CTI is a heavily parameterized version of ARM’s CSCTI.
It allows a debugger to send to trigger events to a processor or to send
a trigger event to one or more processors when a trigger event occurs on
another processor on the same SoC, or even between SoCs.
QCOM extended CTI supports up to 128 triggers. And some of the register
offsets are changed.
The commands to configure CTI triggers are the same as ARM's CTI.
Hi Reviewers,
Could you please help to provide some comments from the design point of
view for the changes ?
The main difference of extended CTI to the normal CTI is that the
address mapping is changed and it supports a max of 128 trigger signals.
On one soc, there will be both normal arm CTIs and QCOM extended CTIs.
As max trigger number becomes 128. So triger registers becomes 4.
Like CTITRIGINSTATUS --- > CTITRIGINSTATUS_EXTENDED(n) (0x040 + (4
* n)) n is 0 to 4.
Thanks
Jinlong Mao
Mao Jinlong (2):
dt-bindings: arm: Add Qualcomm extended CTI
coresight: cti: Add Qualcomm extended CTI support
.../bindings/arm/arm,coresight-cti.yaml | 14 ++
.../hwtracing/coresight/coresight-cti-core.c | 75 +++++++----
.../coresight/coresight-cti-platform.c | 16 ++-
.../hwtracing/coresight/coresight-cti-sysfs.c | 124 ++++++++++++++----
drivers/hwtracing/coresight/coresight-cti.h | 123 +++++++++++------
5 files changed, 253 insertions(+), 99 deletions(-)
