Add dts nodes to enable ethernet interface on qcs8300-ride and Rev 2 platforms. The EMAC, SerDes and EPHY version are the same as those in sa8775p. Signed-off-by: Yijie Yang <quic_yijiyang@xxxxxxxxxxx> --- This patch series depends on below patch series: https://lore.kernel.org/all/20240925-qcs8300_initial_dtsi-v2-0-494c40fa2a42@xxxxxxxxxxx/ https://lore.kernel.org/all/20241010-schema-v1-0-98b2d0a2f7a2@xxxxxxxxxxx/ --- Yijie Yang (5): dt-bindings: arm: qcom: add qcs8300-ride Rev 2 arm64: dts: qcom: qcs8300: add the first 1Gb ethernet arm64: dts: qcom: qcs8300-ride: enable ethernet0 arm64: dts: qcom: move common parts for qcs8300-ride variants into a .dtsi arm64: dts: qcom: qcs8300-ride-r2: add new board file Documentation/devicetree/bindings/arm/qcom.yaml | 1 + arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/qcs8300-ride-r2.dts | 33 +++ arch/arm64/boot/dts/qcom/qcs8300-ride.dts | 267 ++--------------- arch/arm64/boot/dts/qcom/qcs8300-ride.dtsi | 364 ++++++++++++++++++++++++ arch/arm64/boot/dts/qcom/qcs8300.dtsi | 43 +++ 6 files changed, 458 insertions(+), 251 deletions(-) --- base-commit: 41d815847be394bd5741faf6a3c1a7adb9f17066 change-id: 20241010-dts_qcs8300-bfc87dda5175 Best regards, -- Yijie Yang <quic_yijiyang@xxxxxxxxxxx>
