[PATCH v3] arm64: dts: qcom: x1e80100: Fix PCIe 6a lanes description

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Fix the description and compatible for PCIe 6a, as it is in fact a
4-lanes controller and PHY, but it can also be used in 2-lanes mode. For
4-lanes mode, it uses the lanes provided by PCIe 6b. For 2-lanes mode,
PCIe 6a uses 2 lanes and then PCIe 6b uses the other 2 lanes. The number
of lanes in which the PHY should be configured depends on a TCSR register
value on each individual board.

Cc: stable+noautosel@xxxxxxxxxx # Depends on pcie-qcom 16.0 GT/s support
Fixes: 5eb83fc10289 ("arm64: dts: qcom: x1e80100: Add PCIe nodes")
Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
---
Changes in v3:
- Re-worded the commit message once more to suggest a fix w.r.t
  lanes.
- Added back fixes tag and CC stable but with noautosel reason
- Picked up Konrad's R-b tag.
- Link to v2: https://lore.kernel.org/r/20241004-x1e80100-dts-fixes-pcie6a-v2-1-3af9ff7a5a71@xxxxxxxxxx

Changes in v2:
- Re-worded the commit message according to Johan's suggestions
- Dropped the clocks changes.
- Dropped the fixes tag as this relies on the Gen4 4-lanes stability
  patchset which has been only merged in 6.12, so backporting this patch
  would break NVMe support for all platforms.
- Link to v1: https://lore.kernel.org/r/20240531-x1e80100-dts-fixes-pcie6a-v1-2-1573ebcae1e8@xxxxxxxxxx
---
 arch/arm64/boot/dts/qcom/x1e80100.dtsi | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
index a36076e3c56b5b8815eb41ec55e2e1e5bd878201..4ec712cb7a26d8fe434631cf15949524fd22c7d9 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
@@ -2931,7 +2931,7 @@ pcie6a: pci@1bf8000 {
 			dma-coherent;
 
 			linux,pci-domain = <6>;
-			num-lanes = <2>;
+			num-lanes = <4>;
 
 			interrupts = <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>,
@@ -2997,8 +2997,9 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
 		};
 
 		pcie6a_phy: phy@1bfc000 {
-			compatible = "qcom,x1e80100-qmp-gen4x2-pcie-phy";
-			reg = <0 0x01bfc000 0 0x2000>;
+			compatible = "qcom,x1e80100-qmp-gen4x4-pcie-phy";
+			reg = <0 0x01bfc000 0 0x2000>,
+			      <0 0x01bfe000 0 0x2000>;
 
 			clocks = <&gcc GCC_PCIE_6A_PHY_AUX_CLK>,
 				 <&gcc GCC_PCIE_6A_CFG_AHB_CLK>,
@@ -3021,6 +3022,8 @@ pcie6a_phy: phy@1bfc000 {
 
 			power-domains = <&gcc GCC_PCIE_6_PHY_GDSC>;
 
+			qcom,4ln-config-sel = <&tcsr 0x1a000 0>;
+
 			#clock-cells = <0>;
 			clock-output-names = "pcie6a_pipe_clk";
 

---
base-commit: c02d24a5af66a9806922391493205a344749f2c4
change-id: 20241003-x1e80100-dts-fixes-pcie6a-b9f1171e8d5b

Best regards,
-- 
Abel Vesa <abel.vesa@xxxxxxxxxx>





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux