[PATCH v4 2/3] PCI: dwc: Using parent_bus_addr in of_range to eliminate cpu_addr_fixup()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



parent_bus_addr in struct of_range can indicate address information just
ahead of PCIe controller. Most system's bus fabric use 1:1 map between
input and output address. but some hardware like i.MX8QXP doesn't use 1:1
map. See below diagram:

            ┌─────────┐                    ┌────────────┐
 ┌─────┐    │         │ IA: 0x8ff0_0000    │            │
 │ CPU ├───►│   ┌────►├─────────────────┐  │ PCI        │
 └─────┘    │   │     │ IA: 0x8ff8_0000 │  │            │
  CPU Addr  │   │  ┌─►├─────────────┐   │  │ Controller │
0x7ff0_0000─┼───┘  │  │             │   │  │            │
            │      │  │             │   │  │            │   PCI Addr
0x7ff8_0000─┼──────┘  │             │   └──► CfgSpace  ─┼────────────►
            │         │             │      │            │    0
0x7000_0000─┼────────►├─────────┐   │      │            │
            └─────────┘         │   └──────► IOSpace   ─┼────────────►
             BUS Fabric         │          │            │    0
                                │          │            │
                                └──────────► MemSpace  ─┼────────────►
                        IA: 0x8000_0000    │            │  0x8000_0000
                                           └────────────┘

bus@5f000000 {
	compatible = "simple-bus";
	#address-cells = <1>;
	#size-cells = <1>;
	ranges = <0x5f000000 0x0 0x5f000000 0x21000000>,
		 <0x80000000 0x0 0x70000000 0x10000000>;

	pcie@5f010000 {
		compatible = "fsl,imx8q-pcie";
		reg = <0x5f010000 0x10000>, <0x8ff00000 0x80000>;
		reg-names = "dbi", "config";
		#address-cells = <3>;
		#size-cells = <2>;
		device_type = "pci";
		bus-range = <0x00 0xff>;
		ranges = <0x81000000 0 0x00000000 0x8ff80000 0 0x00010000>,
			 <0x82000000 0 0x80000000 0x80000000 0 0x0ff00000>;
	...
	};
};

Term internal address (IA) here means the address just before PCIe
controller. After ATU use this IA instead CPU address, cpu_addr_fixup() can
be removed.

Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
---
Change from v3 to v4
- none

Change from v2 to v3
- %s/cpu_untranslate_addr/parent_bus_addr/g
- update diagram.
- improve commit message.

Change from v1 to v2
- update because patch1 change get untranslate address method.
- add using_dtbus_info in case break back compatibility for exited platform.
---
 drivers/pci/controller/dwc/pcie-designware-host.c | 42 +++++++++++++++++++++++
 drivers/pci/controller/dwc/pcie-designware.h      |  8 +++++
 2 files changed, 50 insertions(+)

diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index 3e41865c72904..823ff42c2e2c9 100644
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
@@ -418,6 +418,34 @@ static void dw_pcie_host_request_msg_tlp_res(struct dw_pcie_rp *pp)
 	}
 }
 
+static int dw_pcie_get_untranslate_addr(struct dw_pcie *pci, resource_size_t pci_addr,
+					resource_size_t *i_addr)
+{
+	struct device *dev = pci->dev;
+	struct device_node *np = dev->of_node;
+	struct of_range_parser parser;
+	struct of_range range;
+	int ret;
+
+	if (!pci->using_dtbus_info) {
+		*i_addr = pci_addr;
+		return 0;
+	}
+
+	ret = of_range_parser_init(&parser, np);
+	if (ret)
+		return ret;
+
+	for_each_of_pci_range(&parser, &range) {
+		if (pci_addr == range.bus_addr) {
+			*i_addr = range.parent_bus_addr;
+			break;
+		}
+	}
+
+	return 0;
+}
+
 int dw_pcie_host_init(struct dw_pcie_rp *pp)
 {
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
@@ -427,6 +455,7 @@ int dw_pcie_host_init(struct dw_pcie_rp *pp)
 	struct resource_entry *win;
 	struct pci_host_bridge *bridge;
 	struct resource *res;
+	int index;
 	int ret;
 
 	raw_spin_lock_init(&pp->lock);
@@ -440,6 +469,13 @@ int dw_pcie_host_init(struct dw_pcie_rp *pp)
 		pp->cfg0_size = resource_size(res);
 		pp->cfg0_base = res->start;
 
+		if (pci->using_dtbus_info) {
+			index = of_property_match_string(np, "reg-names", "config");
+			if (index < 0)
+				return -EINVAL;
+			of_property_read_reg(np, index, &pp->cfg0_base, NULL);
+		}
+
 		pp->va_cfg0_base = devm_pci_remap_cfg_resource(dev, res);
 		if (IS_ERR(pp->va_cfg0_base))
 			return PTR_ERR(pp->va_cfg0_base);
@@ -462,6 +498,9 @@ int dw_pcie_host_init(struct dw_pcie_rp *pp)
 		pp->io_base = pci_pio_to_address(win->res->start);
 	}
 
+	if (dw_pcie_get_untranslate_addr(pci, pp->io_bus_addr, &pp->io_base))
+		return -ENODEV;
+
 	/* Set default bus ops */
 	bridge->ops = &dw_pcie_ops;
 	bridge->child_ops = &dw_child_pcie_ops;
@@ -733,6 +772,9 @@ static int dw_pcie_iatu_setup(struct dw_pcie_rp *pp)
 		atu.cpu_addr = entry->res->start;
 		atu.pci_addr = entry->res->start - entry->offset;
 
+		if (dw_pcie_get_untranslate_addr(pci, atu.pci_addr, &atu.cpu_addr))
+			return -EINVAL;
+
 		/* Adjust iATU size if MSG TLP region was allocated before */
 		if (pp->msg_res && pp->msg_res->parent == entry->res)
 			atu.size = resource_size(entry->res) -
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index c189781524fb8..e22d32b5a5f19 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -464,6 +464,14 @@ struct dw_pcie {
 	struct reset_control_bulk_data	core_rsts[DW_PCIE_NUM_CORE_RSTS];
 	struct gpio_desc		*pe_rst;
 	bool			suspended;
+	/*
+	 * Use device tree 'ranges' property of bus node instead using
+	 * cpu_addr_fixup(). Some old platform dts 'ranges' in bus node may not
+	 * reflect real hardware's behavior. In case break these platform back
+	 * compatibility, add below flags. Set it true if dts already correct
+	 * indicate bus fabric address convert.
+	 */
+	bool			using_dtbus_info;
 };
 
 #define to_dw_pcie_from_pp(port) container_of((port), struct dw_pcie, pp)

-- 
2.34.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux