[PATCH v5 07/10] iio: dac: ad3552r: changes to use FIELD_PREP

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>

Changes to use FIELD_PREP, so that driver-specific ad3552r_field_prep
is removed. Variables (arrays) that was used to call ad3552r_field_prep
are removed too.

Signed-off-by: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
---
 drivers/iio/dac/ad3552r.c | 166 ++++++++++++++--------------------------------
 1 file changed, 49 insertions(+), 117 deletions(-)

diff --git a/drivers/iio/dac/ad3552r.c b/drivers/iio/dac/ad3552r.c
index bd37d304ca70..c27706c5ba10 100644
--- a/drivers/iio/dac/ad3552r.c
+++ b/drivers/iio/dac/ad3552r.c
@@ -210,46 +210,6 @@ static const s32 gains_scaling_table[] = {
 	[AD3552R_CH_GAIN_SCALING_0_125]		= 125
 };
 
-enum ad3552r_dev_attributes {
-	/* - Direct register values */
-	/* From 0-3 */
-	AD3552R_SDO_DRIVE_STRENGTH,
-	/*
-	 * 0 -> Internal Vref, vref_io pin floating (default)
-	 * 1 -> Internal Vref, vref_io driven by internal vref
-	 * 2 or 3 -> External Vref
-	 */
-	AD3552R_VREF_SELECT,
-	/* Read registers in ascending order if set. Else descending */
-	AD3552R_ADDR_ASCENSION,
-};
-
-enum ad3552r_ch_attributes {
-	/* DAC powerdown */
-	AD3552R_CH_DAC_POWERDOWN,
-	/* DAC amplifier powerdown */
-	AD3552R_CH_AMPLIFIER_POWERDOWN,
-	/* Select the output range. Select from enum ad3552r_ch_output_range */
-	AD3552R_CH_OUTPUT_RANGE_SEL,
-	/*
-	 * Over-rider the range selector in order to manually set the output
-	 * voltage range
-	 */
-	AD3552R_CH_RANGE_OVERRIDE,
-	/* Manually set the offset voltage */
-	AD3552R_CH_GAIN_OFFSET,
-	/* Sets the polarity of the offset. */
-	AD3552R_CH_GAIN_OFFSET_POLARITY,
-	/* PDAC gain scaling */
-	AD3552R_CH_GAIN_SCALING_P,
-	/* NDAC gain scaling */
-	AD3552R_CH_GAIN_SCALING_N,
-	/* Rfb value */
-	AD3552R_CH_RFB,
-	/* Channel select. When set allow Input -> DAC and Mask -> DAC */
-	AD3552R_CH_SELECT,
-};
-
 struct ad3552r_ch_data {
 	s32	scale_int;
 	s32	scale_dec;
@@ -285,45 +245,6 @@ struct ad3552r_desc {
 	unsigned int		num_ch;
 };
 
-static const u16 addr_mask_map[][2] = {
-	[AD3552R_ADDR_ASCENSION] = {
-			AD3552R_REG_ADDR_INTERFACE_CONFIG_A,
-			AD3552R_MASK_ADDR_ASCENSION
-	},
-	[AD3552R_SDO_DRIVE_STRENGTH] = {
-			AD3552R_REG_ADDR_INTERFACE_CONFIG_D,
-			AD3552R_MASK_SDO_DRIVE_STRENGTH
-	},
-	[AD3552R_VREF_SELECT] = {
-			AD3552R_REG_ADDR_SH_REFERENCE_CONFIG,
-			AD3552R_MASK_REFERENCE_VOLTAGE_SEL
-	},
-};
-
-/* 0 -> reg addr, 1->ch0 mask, 2->ch1 mask */
-static const u16 addr_mask_map_ch[][3] = {
-	[AD3552R_CH_DAC_POWERDOWN] = {
-			AD3552R_REG_ADDR_POWERDOWN_CONFIG,
-			AD3552R_MASK_CH_DAC_POWERDOWN(0),
-			AD3552R_MASK_CH_DAC_POWERDOWN(1)
-	},
-	[AD3552R_CH_AMPLIFIER_POWERDOWN] = {
-			AD3552R_REG_ADDR_POWERDOWN_CONFIG,
-			AD3552R_MASK_CH_AMPLIFIER_POWERDOWN(0),
-			AD3552R_MASK_CH_AMPLIFIER_POWERDOWN(1)
-	},
-	[AD3552R_CH_OUTPUT_RANGE_SEL] = {
-			AD3552R_REG_ADDR_CH0_CH1_OUTPUT_RANGE,
-			AD3552R_MASK_CH_OUTPUT_RANGE_SEL(0),
-			AD3552R_MASK_CH_OUTPUT_RANGE_SEL(1)
-	},
-	[AD3552R_CH_SELECT] = {
-			AD3552R_REG_ADDR_CH_SELECT_16B,
-			AD3552R_MASK_CH(0),
-			AD3552R_MASK_CH(1)
-	}
-};
-
 static u8 _ad3552r_reg_len(u8 addr)
 {
 	switch (addr) {
@@ -399,11 +320,6 @@ static int ad3552r_read_reg(struct ad3552r_desc *dac, u8 addr, u16 *val)
 	return 0;
 }
 
-static u16 ad3552r_field_prep(u16 val, u16 mask)
-{
-	return (val << __ffs(mask)) & mask;
-}
-
 /* Update field of a register, shift val if needed */
 static int ad3552r_update_reg_field(struct ad3552r_desc *dac, u8 addr, u16 mask,
 				    u16 val)
@@ -416,21 +332,11 @@ static int ad3552r_update_reg_field(struct ad3552r_desc *dac, u8 addr, u16 mask,
 		return ret;
 
 	reg &= ~mask;
-	reg |= ad3552r_field_prep(val, mask);
+	reg |= val;
 
 	return ad3552r_write_reg(dac, addr, reg);
 }
 
-static int ad3552r_set_ch_value(struct ad3552r_desc *dac,
-				enum ad3552r_ch_attributes attr,
-				u8 ch,
-				u16 val)
-{
-	/* Update register related to attributes in chip */
-	return ad3552r_update_reg_field(dac, addr_mask_map_ch[attr][0],
-				       addr_mask_map_ch[attr][ch + 1], val);
-}
-
 #define AD3552R_CH_DAC(_idx) ((struct iio_chan_spec) {		\
 	.type = IIO_VOLTAGE,					\
 	.output = true,						\
@@ -510,8 +416,14 @@ static int ad3552r_write_raw(struct iio_dev *indio_dev,
 					val);
 		break;
 	case IIO_CHAN_INFO_ENABLE:
-		err = ad3552r_set_ch_value(dac, AD3552R_CH_DAC_POWERDOWN,
-					   chan->channel, !val);
+		if (chan->channel == 0)
+			val = FIELD_PREP(AD3552R_MASK_CH_DAC_POWERDOWN(0), !val);
+		else
+			val = FIELD_PREP(AD3552R_MASK_CH_DAC_POWERDOWN(1), !val);
+
+		err = ad3552r_update_reg_field(dac, AD3552R_REG_ADDR_POWERDOWN_CONFIG,
+					       AD3552R_MASK_CH_DAC_POWERDOWN(chan->channel),
+					       val);
 		break;
 	default:
 		err = -EINVAL;
@@ -715,9 +627,9 @@ static int ad3552r_reset(struct ad3552r_desc *dac)
 	}
 
 	return ad3552r_update_reg_field(dac,
-					addr_mask_map[AD3552R_ADDR_ASCENSION][0],
-					addr_mask_map[AD3552R_ADDR_ASCENSION][1],
-					val);
+					AD3552R_REG_ADDR_INTERFACE_CONFIG_A,
+					AD3552R_MASK_ADDR_ASCENSION,
+					FIELD_PREP(AD3552R_MASK_ADDR_ASCENSION, val));
 }
 
 static void ad3552r_get_custom_range(struct ad3552r_desc *dac, s32 i, s32 *v_min,
@@ -812,20 +724,20 @@ static int ad3552r_configure_custom_gain(struct ad3552r_desc *dac,
 				     "mandatory custom-output-range-config property missing\n");
 
 	dac->ch_data[ch].range_override = 1;
-	reg |= ad3552r_field_prep(1, AD3552R_MASK_CH_RANGE_OVERRIDE);
+	reg |= FIELD_PREP(AD3552R_MASK_CH_RANGE_OVERRIDE, 1);
 
 	err = fwnode_property_read_u32(gain_child, "adi,gain-scaling-p", &val);
 	if (err)
 		return dev_err_probe(dev, err,
 				     "mandatory adi,gain-scaling-p property missing\n");
-	reg |= ad3552r_field_prep(val, AD3552R_MASK_CH_GAIN_SCALING_P);
+	reg |= FIELD_PREP(AD3552R_MASK_CH_GAIN_SCALING_P, val);
 	dac->ch_data[ch].p = val;
 
 	err = fwnode_property_read_u32(gain_child, "adi,gain-scaling-n", &val);
 	if (err)
 		return dev_err_probe(dev, err,
 				     "mandatory adi,gain-scaling-n property missing\n");
-	reg |= ad3552r_field_prep(val, AD3552R_MASK_CH_GAIN_SCALING_N);
+	reg |= FIELD_PREP(AD3552R_MASK_CH_GAIN_SCALING_N, val);
 	dac->ch_data[ch].n = val;
 
 	err = fwnode_property_read_u32(gain_child, "adi,rfb-ohms", &val);
@@ -841,9 +753,9 @@ static int ad3552r_configure_custom_gain(struct ad3552r_desc *dac,
 	dac->ch_data[ch].gain_offset = val;
 
 	offset = abs((s32)val);
-	reg |= ad3552r_field_prep((offset >> 8), AD3552R_MASK_CH_OFFSET_BIT_8);
+	reg |= FIELD_PREP(AD3552R_MASK_CH_OFFSET_BIT_8, (offset >> 8));
 
-	reg |= ad3552r_field_prep((s32)val < 0, AD3552R_MASK_CH_OFFSET_POLARITY);
+	reg |= FIELD_PREP(AD3552R_MASK_CH_OFFSET_POLARITY, (s32)val < 0);
 	addr = AD3552R_REG_ADDR_CH_GAIN(ch);
 	err = ad3552r_write_reg(dac, addr,
 				offset & AD3552R_MASK_CH_OFFSET_BITS_0_7);
@@ -886,9 +798,9 @@ static int ad3552r_configure_device(struct ad3552r_desc *dac)
 	}
 
 	err = ad3552r_update_reg_field(dac,
-				       addr_mask_map[AD3552R_VREF_SELECT][0],
-				       addr_mask_map[AD3552R_VREF_SELECT][1],
-				       val);
+				       AD3552R_REG_ADDR_SH_REFERENCE_CONFIG,
+				       AD3552R_MASK_REFERENCE_VOLTAGE_SEL,
+				       FIELD_PREP(AD3552R_MASK_REFERENCE_VOLTAGE_SEL, val));
 	if (err)
 		return err;
 
@@ -900,9 +812,9 @@ static int ad3552r_configure_device(struct ad3552r_desc *dac)
 		}
 
 		err = ad3552r_update_reg_field(dac,
-					       addr_mask_map[AD3552R_SDO_DRIVE_STRENGTH][0],
-					       addr_mask_map[AD3552R_SDO_DRIVE_STRENGTH][1],
-					       val);
+					       AD3552R_REG_ADDR_INTERFACE_CONFIG_D,
+					       AD3552R_MASK_SDO_DRIVE_STRENGTH,
+					       FIELD_PREP(AD3552R_MASK_SDO_DRIVE_STRENGTH, val));
 		if (err)
 			return err;
 	}
@@ -938,9 +850,15 @@ static int ad3552r_configure_device(struct ad3552r_desc *dac)
 						     "Invalid adi,output-range-microvolt value\n");
 
 			val = err;
-			err = ad3552r_set_ch_value(dac,
-						   AD3552R_CH_OUTPUT_RANGE_SEL,
-						   ch, val);
+			if (ch == 0)
+				val = FIELD_PREP(AD3552R_MASK_CH_OUTPUT_RANGE_SEL(0), val);
+			else
+				val = FIELD_PREP(AD3552R_MASK_CH_OUTPUT_RANGE_SEL(1), val);
+
+			err = ad3552r_update_reg_field(dac,
+						       AD3552R_REG_ADDR_CH0_CH1_OUTPUT_RANGE,
+						       AD3552R_MASK_CH_OUTPUT_RANGE_SEL(ch),
+						       val);
 			if (err)
 				return err;
 
@@ -958,7 +876,14 @@ static int ad3552r_configure_device(struct ad3552r_desc *dac)
 		ad3552r_calc_gain_and_offset(dac, ch);
 		dac->enabled_ch |= BIT(ch);
 
-		err = ad3552r_set_ch_value(dac, AD3552R_CH_SELECT, ch, 1);
+		if (ch == 0)
+			val = FIELD_PREP(AD3552R_MASK_CH(0), 1);
+		else
+			val = FIELD_PREP(AD3552R_MASK_CH(1), 1);
+
+		err = ad3552r_update_reg_field(dac,
+					       AD3552R_REG_ADDR_CH_SELECT_16B,
+					       AD3552R_MASK_CH(ch), val);
 		if (err < 0)
 			return err;
 
@@ -970,8 +895,15 @@ static int ad3552r_configure_device(struct ad3552r_desc *dac)
 	/* Disable unused channels */
 	for_each_clear_bit(ch, &dac->enabled_ch,
 			   dac->model_data->num_hw_channels) {
-		err = ad3552r_set_ch_value(dac, AD3552R_CH_AMPLIFIER_POWERDOWN,
-					   ch, 1);
+		if (ch == 0)
+			val = FIELD_PREP(AD3552R_MASK_CH_OUTPUT_RANGE_SEL(0), 1);
+		else
+			val = FIELD_PREP(AD3552R_MASK_CH_OUTPUT_RANGE_SEL(1), 1);
+
+		err = ad3552r_update_reg_field(dac,
+					       AD3552R_REG_ADDR_POWERDOWN_CONFIG,
+					       AD3552R_MASK_CH_OUTPUT_RANGE_SEL(ch),
+					       val);
 		if (err)
 			return err;
 	}

-- 
2.45.0.rc1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux