Add the driver to the build system. The Otto platform currently has only some drivers upstream and is missing a lot of platform bits. Use only the bare minimum of dependencies. Changes in v2: - Change naming convention - Add more help text Signed-off-by: Markus Stockhausen <markus.stockhausen@xxxxxx> --- drivers/phy/realtek/Kconfig | 10 ++++++++++ drivers/phy/realtek/Makefile | 1 + 2 files changed, 11 insertions(+) diff --git a/drivers/phy/realtek/Kconfig b/drivers/phy/realtek/Kconfig index 75ac7e7c31ae..021b4c4e700a 100644 --- a/drivers/phy/realtek/Kconfig +++ b/drivers/phy/realtek/Kconfig @@ -30,3 +30,13 @@ config PHY_RTK_RTD_USB3PHY of the parameters. endif # ARCH_REALTEK || COMPILE_TEST + +config PHY_RTK_OTTO_SERDES + tristate "SerDes driver for the Realtek Otto platform" + depends on OF + select GENERIC_PHY + help + Enable this to support Realtek SerDes in the RTL83xx and + RTL93xx network SoCs. These are based on MIPS32 architecture + and the SerDes connect to one to octa transceivers to build + up switches with up to 52 ports. diff --git a/drivers/phy/realtek/Makefile b/drivers/phy/realtek/Makefile index ed7b47ff8a26..34e607f33961 100644 --- a/drivers/phy/realtek/Makefile +++ b/drivers/phy/realtek/Makefile @@ -1,3 +1,4 @@ # SPDX-License-Identifier: GPL-2.0 obj-$(CONFIG_PHY_RTK_RTD_USB2PHY) += phy-rtk-usb2.o obj-$(CONFIG_PHY_RTK_RTD_USB3PHY) += phy-rtk-usb3.o +obj-$(CONFIG_PHY_RTK_OTTO_SERDES) += phy-rtk-otto-serdes.o -- 2.46.2
