On Mon, 07 Oct 2024 14:39:46 +0200, Andrea della Porta wrote: > Common YAML schema for devices that exports internal peripherals through > PCI BARs. The BARs are exposed as simple-buses through which the > peripherals can be accessed. > > This is not intended to be used as a standalone binding, but should be > included by device specific bindings. > > Signed-off-by: Andrea della Porta <andrea.porta@xxxxxxxx> > --- > .../devicetree/bindings/pci/pci-ep-bus.yaml | 69 +++++++++++++++++++ > MAINTAINERS | 1 + > 2 files changed, 70 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pci/pci-ep-bus.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/pci-ep-bus.yaml: 'oneOf' conditional failed, one must be fixed: 'unevaluatedProperties' is a required property 'additionalProperties' is a required property hint: Either unevaluatedProperties or additionalProperties must be present from schema $id: http://devicetree.org/meta-schemas/core.yaml# doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/e1d6c72d9f41218e755b615b9a985db075ce9c28.1728300189.git.andrea.porta@xxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.