On Mon, 07 Oct 2024 11:32:04 +0200, Francesco Dolcini wrote: > From: Parth Pancholi <parth.pancholi@xxxxxxxxxxx> > > Add device tree bindings for TI's TUSB73x0 PCIe-to-USB 3.0 xHCI > host controller. The controller supports software configuration > through PCIe registers, such as controlling the PWRONx polarity > via the USB control register (E0h). > > Similar generic PCIe-based bindings can be found as qcom,ath11k-pci.yaml > as an example. > > Datasheet: https://www.ti.com/lit/ds/symlink/tusb7320.pdf > Signed-off-by: Parth Pancholi <parth.pancholi@xxxxxxxxxxx> > Signed-off-by: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx> > --- > v2: rename property to ti,tusb7320-pwron-active-high and change type to flag > --- > .../bindings/usb/ti,tusb73x0-pci.yaml | 60 +++++++++++++++++++ > 1 file changed, 60 insertions(+) > create mode 100644 Documentation/devicetree/bindings/usb/ti,tusb73x0-pci.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/usb/ti,tusb73x0-pci.example.dtb: pcie@0: usb@0:compatible: ['pci104C,8241'] does not contain items matching the given schema from schema $id: http://devicetree.org/schemas/pci/pci-bus-common.yaml# doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20241007093205.27130-2-francesco@xxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
