This DT overlay contains the gpio-line-names property for
RaspberryPi 5.
It's intended to be loaded from userspace leveraging the RP1
driver interface through configfs, as follows:
cat rpi-rp1-gpios-5-b.dtbo > /sys/kernel/config/rp1-cfg/gpio_set_names
Signed-off-by: Andrea della Porta <andrea.porta@xxxxxxxx>
---
MAINTAINERS | 1 +
arch/arm64/boot/dts/broadcom/Makefile | 3 +-
.../boot/dts/broadcom/rpi-rp1-gpios-5-b.dtso | 62 +++++++++++++++++++
3 files changed, 65 insertions(+), 1 deletion(-)
create mode 100644 arch/arm64/boot/dts/broadcom/rpi-rp1-gpios-5-b.dtso
diff --git a/MAINTAINERS b/MAINTAINERS
index 032678fb2470..2b61d9a84dae 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -19384,6 +19384,7 @@ RASPBERRY PI RP1 PCI DRIVER
M: Andrea della Porta <andrea.porta@xxxxxxxx>
S: Maintained
F: arch/arm64/boot/dts/broadcom/rp1.dtso
+F: arch/arm64/boot/dts/broadcom/rpi-rp1-gpios-5-b.dtso
F: Documentation/devicetree/bindings/clock/raspberrypi,rp1-clocks.yaml
F: Documentation/devicetree/bindings/misc/pci1de4,1.yaml
F: Documentation/devicetree/bindings/pci/pci-ep-bus.yaml
diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile
index 92565e9781ad..d384937b0536 100644
--- a/arch/arm64/boot/dts/broadcom/Makefile
+++ b/arch/arm64/boot/dts/broadcom/Makefile
@@ -11,7 +11,8 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-400.dtb \
bcm2837-rpi-3-b.dtb \
bcm2837-rpi-3-b-plus.dtb \
bcm2837-rpi-cm3-io3.dtb \
- bcm2837-rpi-zero-2-w.dtb
+ bcm2837-rpi-zero-2-w.dtb \
+ rpi-rp1-gpios-5-b.dtbo
subdir-y += bcmbca
subdir-y += northstar2
diff --git a/arch/arm64/boot/dts/broadcom/rpi-rp1-gpios-5-b.dtso b/arch/arm64/boot/dts/broadcom/rpi-rp1-gpios-5-b.dtso
new file mode 100644
index 000000000000..76a243a71644
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/rpi-rp1-gpios-5-b.dtso
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+/plugin/;
+
+&rp1_gpio {
+ gpio-line-names =
+ "ID_SDA", // GPIO0
+ "ID_SCL", // GPIO1
+ "GPIO2", // GPIO2
+ "GPIO3", // GPIO3
+ "GPIO4", // GPIO4
+ "GPIO5", // GPIO5
+ "GPIO6", // GPIO6
+ "GPIO7", // GPIO7
+ "GPIO8", // GPIO8
+ "GPIO9", // GPIO9
+ "GPIO10", // GPIO10
+ "GPIO11", // GPIO11
+ "GPIO12", // GPIO12
+ "GPIO13", // GPIO13
+ "GPIO14", // GPIO14
+ "GPIO15", // GPIO15
+ "GPIO16", // GPIO16
+ "GPIO17", // GPIO17
+ "GPIO18", // GPIO18
+ "GPIO19", // GPIO19
+ "GPIO20", // GPIO20
+ "GPIO21", // GPIO21
+ "GPIO22", // GPIO22
+ "GPIO23", // GPIO23
+ "GPIO24", // GPIO24
+ "GPIO25", // GPIO25
+ "GPIO26", // GPIO26
+ "GPIO27", // GPIO27
+ "PCIE_RP1_WAKE", // GPIO28
+ "FAN_TACH", // GPIO29
+ "HOST_SDA", // GPIO30
+ "HOST_SCL", // GPIO31
+ "ETH_RST_N", // GPIO32
+ "", // GPIO33
+ "CD0_IO0_MICCLK", // GPIO34
+ "CD0_IO0_MICDAT0", // GPIO35
+ "RP1_PCIE_CLKREQ_N", // GPIO36
+ "", // GPIO37
+ "CD0_SDA", // GPIO38
+ "CD0_SCL", // GPIO39
+ "CD1_SDA", // GPIO40
+ "CD1_SCL", // GPIO41
+ "USB_VBUS_EN", // GPIO42
+ "USB_OC_N", // GPIO43
+ "RP1_STAT_LED", // GPIO44
+ "FAN_PWM", // GPIO45
+ "CD1_IO0_MICCLK", // GPIO46
+ "2712_WAKE", // GPIO47
+ "CD1_IO1_MICDAT1", // GPIO48
+ "EN_MAX_USB_CUR", // GPIO49
+ "", // GPIO50
+ "", // GPIO51
+ "", // GPIO52
+ ""; // GPIO53
+};
--
2.35.3
