The RP1 found on Raspberry Pi 5 board needs an external crystal at 50MHz.
Add clk_rp1_xosc node to provide that.
Signed-off-by: Andrea della Porta <andrea.porta@xxxxxxxx>
---
arch/arm64/boot/dts/broadcom/bcm2712.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm64/boot/dts/broadcom/bcm2712.dtsi b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
index 6e5a984c1d4e..efdf9abf04c4 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
@@ -38,6 +38,13 @@ clk_emmc2: clk-emmc2 {
clock-frequency = <200000000>;
clock-output-names = "emmc2-clock";
};
+
+ clk_rp1_xosc: clock-rp1-xosc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "rp1-xosc";
+ clock-frequency = <50000000>;
+ };
};
cpus: cpus {
--
2.35.3
