On Thu, Oct 03, 2024 at 07:28:04AM GMT, Karl Chan wrote: > Build the Linksys EA9350 V3 device trees from the arm64 tree together with the ARM32 include to allow booting this device on ARM32. -ETOOLONG. Please wrap the line at 75 chars per line. While doing it please also add the reason for the change (32-bit firmware on the router). > > The approach to include device tree files from other architectures is > inspired from e.g. the Raspberry Pi (bcm2711-rpi-4-b.dts) where this is > used to build the device tree for both ARM32 and ARM64. > > Signed-off-by: Karl Chan <exxxxkc@xxxxxxxxxxxxxxx> > --- > arch/arm/boot/dts/qcom/Makefile | 1 + > arch/arm/boot/dts/qcom/qcom-ipq5018-linksys-jamaica.dts | 2 ++ > 2 files changed, 3 insertions(+) > create mode 100644 arch/arm/boot/dts/qcom/qcom-ipq5018-linksys-jamaica.dts > > diff --git a/arch/arm/boot/dts/qcom/Makefile b/arch/arm/boot/dts/qcom/Makefile > index f06c6d425e91..147dbeb30a6a 100644 > --- a/arch/arm/boot/dts/qcom/Makefile > +++ b/arch/arm/boot/dts/qcom/Makefile > @@ -23,6 +23,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ > qcom-ipq4019-ap.dk04.1-c3.dtb \ > qcom-ipq4019-ap.dk07.1-c1.dtb \ > qcom-ipq4019-ap.dk07.1-c2.dtb \ > + qcom-ipq5018-linksys-jamaica.dtb \ > qcom-ipq8064-ap148.dtb \ > qcom-ipq8064-rb3011.dtb \ > qcom-msm8226-microsoft-dempsey.dtb \ > diff --git a/arch/arm/boot/dts/qcom/qcom-ipq5018-linksys-jamaica.dts b/arch/arm/boot/dts/qcom/qcom-ipq5018-linksys-jamaica.dts > new file mode 100644 > index 000000000000..9a6ad767ebd7 > --- /dev/null > +++ b/arch/arm/boot/dts/qcom/qcom-ipq5018-linksys-jamaica.dts > @@ -0,0 +1,2 @@ > +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause > +#include <arm64/qcom/ipq5018-linksys-jamaica.dts> > -- > 2.46.1 > -- With best wishes Dmitry
