Re: [PATCH] arm64: dts: qcom: qcm6490: Allow UFS regulators load/mode setting

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Oct 04, 2024 at 01:31:10PM GMT, Rakesh Kota wrote:
> The UFS driver expects to be able to set load (and by extension, mode)
> on its supply regulators. Add the necessary properties to make that
> possible.
> 
> While at it, UFS rails have different voltage requirement for UFS2.x
> v/s UFS3.x. Bootloader sets the proper voltage based on UFS type.
> There can be case where the voltage set by bootloader is overridden
> by HLOS client.
> 
> To prevent above issue, add change to remove voltage voting support
> for dedicated UFS rails.

add change to remove smth doesn't sound correct to me.
Please don't depend on the bootloader and describe hardware
configuration. If there can be two types of IDP boards and you can not
identify the voltage via other means, please create something like
qcm6490-idp-ufs3.dts. Please add proper Fixes tags.
Last, but not least, as Bjorn wrote, please split into two patches.

> 
> Signed-off-by: Rakesh Kota <quic_kotarake@xxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/qcm6490-idp.dts | 12 ++++++++----
>  1 file changed, 8 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
> index 84c45419cb8d..8a4df9c2a946 100644
> --- a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
> +++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
> @@ -258,13 +258,15 @@ vreg_l6b_1p2: ldo6 {
>  			regulator-name = "vreg_l6b_1p2";
>  			regulator-min-microvolt = <1140000>;
>  			regulator-max-microvolt = <1260000>;
> +			regulator-allow-set-load;
> +			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM RPMH_REGULATOR_MODE_HPM>;
>  			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>  		};
>  
>  		vreg_l7b_2p952: ldo7 {
>  			regulator-name = "vreg_l7b_2p952";
> -			regulator-min-microvolt = <2400000>;
> -			regulator-max-microvolt = <3544000>;
> +			regulator-allow-set-load;
> +			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM RPMH_REGULATOR_MODE_HPM>;
>  			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>  		};
>  
> @@ -277,8 +279,8 @@ vreg_l8b_0p904: ldo8 {
>  
>  		vreg_l9b_1p2: ldo9 {
>  			regulator-name = "vreg_l9b_1p2";
> -			regulator-min-microvolt = <1200000>;
> -			regulator-max-microvolt = <1304000>;
> +			regulator-allow-set-load;
> +			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM RPMH_REGULATOR_MODE_HPM>;
>  			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>  		};
>  
> @@ -467,6 +469,8 @@ vreg_l10c_0p88: ldo10 {
>  			regulator-name = "vreg_l10c_0p88";
>  			regulator-min-microvolt = <720000>;
>  			regulator-max-microvolt = <1050000>;
> +			regulator-allow-set-load;
> +			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM RPMH_REGULATOR_MODE_HPM>;
>  			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>  		};
>  
> -- 
> 2.34.1
> 

-- 
With best wishes
Dmitry




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux