Re: [PATCH 2/2] arm64: dts: qcom: Add X1E001DE Snapdragon Devkit for Windows

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Oct 06, 2024 at 12:33:21AM GMT, Sibi Sankar wrote:
> 
> 
> On 10/1/24 14:21, Manivannan Sadhasivam wrote:
> > On Tue, Oct 01, 2024 at 09:56:30AM +0300, Dmitry Baryshkov wrote:
> > > On October 1, 2024 5:42:35 AM GMT+03:00, Bjorn Andersson <andersson@xxxxxxxxxx> wrote:
> > > > On Wed, Sep 11, 2024 at 10:55:05AM GMT, Dmitry Baryshkov wrote:
> > > > > On Wed, Sep 11, 2024 at 01:03:37PM GMT, Sibi Sankar wrote:
> > > > [..]
> > > > > > diff --git a/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts b/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts
> > > > [..]
> > > > > > +
> > > > > > +&pcie5 {
> > > > > > +	perst-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>;
> > > > > > +	wake-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>;
> > > > > > +
> > > > > > +	vddpe-3v3-supply = <&vreg_wwan>;
> > > > > 
> > > > > Please use pwrseq instead.
> > > > > 
> > > > 
> > > > What benefit is there to wrap a single 3.3V regulator in pwrseq driver?
> > > 
> > > First of all, is it really just a 3.3V? Second, is it actually powering up the host controller (as expressed in the device tree? Is it a power supply to the slot (in this case, I think, it should be expressed differently)? Or is it a power supply to the card itself?
> > > 
> > 
> > Yeah, we should get into the details here. We were not paying attention till
> > now, but with the advent of pwrseq, we should describe the power supply properly
> > in DT.
> > 
> > Here I believe the supply is to the PCIe Mini Card connector where a modem is
> > connected. In that case, 3.3v supply should be connected to 3.3Vaux of the
> > connector and we should have a generic pwrseq driver for the mini cards.
> > 
> 
> Hey Mani, Dmitry,
> 
> The schematics are identical to that of the X1E CRD with
> the exception of the pcie daughter card having the rtl8125g
> on it. Yes, the 3.3V supply is connected to the card as well.
> 
> Doesn't this mean all other x1e boards out there needs to be
> updated with pwrseq as well? Anway will get that addressed in
> v3.

Yes please. Check with Bartosz and Johan if they are working on pwrseq
for this platform by chance.

> 
> -Sibi
> 
> > Sibi, please verify the above in schematics.
> > 
> > - Mani

-- 
With best wishes
Dmitry




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux