On Thu, Oct 03, 2024 at 09:15:06PM +0530, Neeraj Sanjay Kale wrote: > This adds a new optional device tree property h2c-ps-gpios, which specifies > the GPIO connected to BT_WAKE_IN pin of the NXP chipset. > > If this property is defined, the driver will use this GPIO for driving chip > into sleep/wakeup state, else use the UART break signal by default. > > Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@xxxxxxx> > --- > v2: Rephrase description and use "-gpios". (Krzysztof, Rob) > --- > .../devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml b/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml > index 37a65badb448..cd8236eb31de 100644 > --- a/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml > +++ b/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml > @@ -34,6 +34,12 @@ properties: > firmware-name: > maxItems: 1 > > + h2c-ps-gpios: > + maxItems: 1 > + description: > + Host-To-Chip power save mechanism is driven by this GPIO > + connected to BT_WAKE_IN pin of the NXP chipset. So this should be wakeup-gpios or device-wakeup-gpios? Best regards, Krzysztof
