From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
There is a version of AXI DAC IP block (for FPGAs) that provides
a physical QSPI bus for AD3552R and similar chips, so supporting
spi-controller functionalities.
For this case, the binding is modified to include some additional
properties.
Signed-off-by: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
---
Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
index 41fe00034742..2d2561a52683 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
@@ -60,6 +60,12 @@ properties:
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3]
+ io-backends:
+ description: The iio backend reference.
+ Device can be optionally connected to the "axi-ad3552r IP" fpga-based
+ QSPI + DDR (Double Data Rate) controller to reach high speed transfers.
+ maxItems: 1
+
'#address-cells':
const: 1
@@ -128,6 +134,7 @@ patternProperties:
- custom-output-range-config
allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
- if:
properties:
compatible:
--
2.45.0.rc1
