Re: [PATCH v3 04/10] dt-bindings: iio: dac: ad3552r: add io-backend support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 30.09.2024 14:20, David Lechner wrote:
> On 9/30/24 10:08 AM, Angelo Dureghello wrote:
> > On 30.09.2024 15:49, Jonathan Cameron wrote:
> >> On Mon, 30 Sep 2024 16:15:41 +0200
> >> Angelo Dureghello <adureghello@xxxxxxxxxxxx> wrote:
> >>
> >>> On 29.09.2024 11:51, Jonathan Cameron wrote:
> >>>> On Thu, 19 Sep 2024 11:20:00 +0200
> >>>> Angelo Dureghello <adureghello@xxxxxxxxxxxx> wrote:
> >>>>   
> >>>>> From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
> >>>>>
> >>>>> There is a version AXI DAC IP block (for FPGAs) that provides
> >>>>> a physical bus for AD3552R and similar chips, and acts as
> >>>>> an SPI controller.  
> >>>>
> >>>> Wrap is a bit short. Aim for < 75 chars for patch descriptions.
> >>>>   
> >>>>>
> >>>>> For this case, the binding is modified to include some
> >>>>> additional properties.
> >>>>>
> >>>>> Signed-off-by: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
> >>>>> ---
> >>>>>  .../devicetree/bindings/iio/dac/adi,ad3552r.yaml   | 42 ++++++++++++++++++++++
> >>>>>  1 file changed, 42 insertions(+)
> >>>>>
> >>>>> diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
> >>>>> index 41fe00034742..aca4a41c2633 100644
> >>>>> --- a/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
> >>>>> +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
> >>>>> @@ -60,6 +60,18 @@ properties:
> >>>>>      $ref: /schemas/types.yaml#/definitions/uint32
> >>>>>      enum: [0, 1, 2, 3]
> >>>>>  
> >>>>> +  io-backends:
> >>>>> +    description: The iio backend reference.  
> >>>>
> >>>> Give a description of what the backend does in this case.  I.e. that it is
> >>>> a qspi DDR backend with ...
> >>>>   
> >>>>> +      An example backend can be found at
> >>>>> +        https://analogdevicesinc.github.io/hdl/library/axi_ad3552r/index.html
> >>>>> +    maxItems: 1
> >>>>> +
> >>>>> +  adi,synchronous-mode:
> >>>>> +    description: Enable waiting for external synchronization signal.
> >>>>> +      Some AXI IP configuration can implement a dual-IP layout, with internal
> >>>>> +      wirings for streaming synchronization.  
> >>>>
> >>>> I've no idea what a dual-IP layout is.  Can you provide a little more info
> >>>> here?  What are the two IPs?
> >>>>  
> >>> IP is a term used in fpga design as "intellectual property", that is
> >>> intended as a functional block of logic or data used to make a 
> >>> field-programmable gate array module.
> >>>
> >>> A dual layout is just 2 same fpga modules in place of one.
> >>>  
> >>> I can add a "fpga" regerence to be more clear.
> >>
> >> IP I was familiar with.  I'm more interested in what each IP is doing in this
> >> case.  Or at least an example of what sort of split of functionality might
> >> make use of this.
> >>
> > 
> > I have an image of the project (that is under development or testing now),
> > not sure how to attach the image here, btw, something as
> >  
> >           axi_ad3552r_0  ----------->---- qspi0
> >               sync_ext_device --.
> >        .- external_sync          |
> >        |                         |
> >        |-------------<-----------                        
> >        |
> >        |   axi_ad3552r_1 ----------->---- qspi1
> >        `- external_sync
> >  
> > My understanding is that it's just a method to use a octal spi,
> > duplicating the transfer rate. I can collect more info in case.
> > 
> 
> No, it's not for octal SPI. It is for synchronizing the data
> transfer to two different DAC chips.
> 
> I think we need a bit more in the DT bindings for this to fully
> describe the wiring shown. We need to indicate that both of the
> two AXI AD3552R IP blocks have external_sync connected, so a
> adi,external-sync flag could be used for this. Then we also need
> to describe that sync_ext_device is only wired up on one of the
> IP blocks. So we would need a separate adi,sync-ext-device flag.
> 
> Then the driver would use this information to A) know that we
> need to set the external sync arm bit when starting buffered
> reads and B) know that the buffered read for the IP block
> instance with sync_ext_device needs to be started last so that
> the data streams for both DACs will be synchronized.

I thought to add this sync stuff thinking that it will be needed
soon, btw, it is not used right now for a single IP. 
I suggest to remove it entirely, since it is actually dead code,
and this hopefully can fast up things.

-- 

Regards,
  Angelo
       




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux