From: Emil Renner Berthing <emil.renner.berthing@xxxxxxxxxxxxx>
Adjust labels for the TH1520 GPIO controllers such that GPIOs can be
referenced by the names used by the documentation. Eg.
GPIO0_X -> <&gpio0 X Y>
GPIO1_X -> <&gpio1 X Y>
GPIO2_X -> <&gpio2 X Y>
GPIO3_X -> <&gpio3 X Y>
GPIO4_X -> <&gpio4 X Y>
AOGPIO_X -> <&aogpio X Y>
Remove labels for the parent GPIO devices that shouldn't need to be
referenced.
Tested-by: Thomas Bonnefille <thomas.bonnefille@xxxxxxxxxxx>
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@xxxxxxxxxxxxx>
Signed-off-by: Drew Fustini <dfustini@xxxxxxxxxxxxxxx>
---
arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts | 2 ++
arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts | 2 ++
arch/riscv/boot/dts/thead/th1520.dtsi | 24 +++++++++++-----------
3 files changed, 16 insertions(+), 12 deletions(-)
diff --git a/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts b/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
index e88b4fce755e..69f82e7afd0b 100644
--- a/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
+++ b/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
@@ -17,6 +17,8 @@ aliases {
gpio1 = &gpio1;
gpio2 = &gpio2;
gpio3 = &gpio3;
+ gpio4 = &gpio4;
+ gpio5 = &aogpio;
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
diff --git a/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts b/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts
index 7738d2895c5a..58ad381fc1c3 100644
--- a/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts
+++ b/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts
@@ -14,6 +14,8 @@ aliases {
gpio1 = &gpio1;
gpio2 = &gpio2;
gpio3 = &gpio3;
+ gpio4 = &gpio4;
+ gpio5 = &aogpio;
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
diff --git a/arch/riscv/boot/dts/thead/th1520.dtsi b/arch/riscv/boot/dts/thead/th1520.dtsi
index 7dcc250ee1d1..b958f249930e 100644
--- a/arch/riscv/boot/dts/thead/th1520.dtsi
+++ b/arch/riscv/boot/dts/thead/th1520.dtsi
@@ -322,14 +322,14 @@ uart3: serial@ffe7f04000 {
status = "disabled";
};
- gpio2: gpio@ffe7f34000 {
+ gpio@ffe7f34000 {
compatible = "snps,dw-apb-gpio";
reg = <0xff 0xe7f34000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clk CLK_GPIO2>;
- portc: gpio-controller@0 {
+ gpio2: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
@@ -342,14 +342,14 @@ portc: gpio-controller@0 {
};
};
- gpio3: gpio@ffe7f38000 {
+ gpio@ffe7f38000 {
compatible = "snps,dw-apb-gpio";
reg = <0xff 0xe7f38000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clk CLK_GPIO3>;
- portd: gpio-controller@0 {
+ gpio3: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
@@ -369,14 +369,14 @@ padctrl1_apsys: pinctrl@ffe7f3c000 {
thead,pad-group = <2>;
};
- gpio0: gpio@ffec005000 {
+ gpio@ffec005000 {
compatible = "snps,dw-apb-gpio";
reg = <0xff 0xec005000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clk CLK_GPIO0>;
- porta: gpio-controller@0 {
+ gpio0: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
@@ -389,14 +389,14 @@ porta: gpio-controller@0 {
};
};
- gpio1: gpio@ffec006000 {
+ gpio@ffec006000 {
compatible = "snps,dw-apb-gpio";
reg = <0xff 0xec006000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clk CLK_GPIO1>;
- portb: gpio-controller@0 {
+ gpio1: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
@@ -544,13 +544,13 @@ timer7: timer@ffffc3303c {
status = "disabled";
};
- ao_gpio0: gpio@fffff41000 {
+ gpio@fffff41000 {
compatible = "snps,dw-apb-gpio";
reg = <0xff 0xfff41000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
- porte: gpio-controller@0 {
+ aogpio: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
@@ -570,13 +570,13 @@ padctrl_aosys: pinctrl@fffff4a000 {
clocks = <&aonsys_clk>;
};
- ao_gpio1: gpio@fffff52000 {
+ gpio@fffff52000 {
compatible = "snps,dw-apb-gpio";
reg = <0xff 0xfff52000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
- portf: gpio-controller@0 {
+ gpio4: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
--
2.34.1
