Re: [PATCH 03/11] PCI: of_property: Sanitize 32 bit PCI address parsed from DT

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Sep 27, 2024 at 08:48:28AM +0200, Andrea della Porta wrote:
> On 15:16 Thu 05 Sep     , Bjorn Helgaas wrote:
> > On Thu, Sep 05, 2024 at 06:43:35PM +0200, Andrea della Porta wrote:
> > > On 17:26 Tue 03 Sep     , Bjorn Helgaas wrote:
> > > > On Mon, Aug 26, 2024 at 09:51:02PM +0200, Andrea della Porta wrote:
> > > > > On 10:24 Wed 21 Aug     , Bjorn Helgaas wrote:
> > > > > > On Tue, Aug 20, 2024 at 04:36:05PM +0200, Andrea della Porta wrote:
> > > > > > > The of_pci_set_address() function parses devicetree PCI range
> > > > > > > specifier assuming the address is 'sanitized' at the origin,
> > > > > > > i.e. without checking whether the incoming address is 32 or 64
> > > > > > > bit has specified in the flags.  In this way an address with no
> > > > > > > OF_PCI_ADDR_SPACE_MEM64 set in the flags could leak through and
> > > > > > > the upper 32 bits of the address will be set too, and this
> > > > > > > violates the PCI specs stating that in 32 bit address the upper
> > > > > > > bit should be zero.
> > > > 
> > > > > > I don't understand this code, so I'm probably missing something.  It
> > > > > > looks like the interesting path here is:
> > > > > > 
> > > > > >   of_pci_prop_ranges
> > > > > >     res = &pdev->resource[...];
> > > > > >     for (j = 0; j < num; j++) {
> > > > > >       val64 = res[j].start;
> > > > > >       of_pci_set_address(..., val64, 0, flags, false);
> > > > > >  +      if (OF_PCI_ADDR_SPACE_MEM64)
> > > > > >  +        prop[1] = upper_32_bits(val64);
> > > > > >  +      else
> > > > > >  +        prop[1] = 0;
> > > ...
> > > > However, the CPU physical address space and the PCI bus address are
> > > > not the same.  Generic code paths should account for that different by
> > > > applying an offset (the offset will be zero on many platforms where
> > > > CPU and PCI bus addresses *look* the same).
> > > > 
> > > > So a generic code path like of_pci_prop_ranges() that basically copies
> > > > a CPU physical address to a PCI bus address looks broken to me.
> > > 
> > > Hmmm, I'd say that a translation from one bus type to the other is
> > > going on nonetheless, and this is done in the current upstream function
> > > as well. This patch of course does not add the translation (which is
> > > already in place), just to do it avoiding generating inconsistent address.
> > 
> > I think I was looking at this backwards.  I assumed we were *parsing"
> > a "ranges" property, but I think in fact we're *building* a "ranges"
> > property to describe an existing PCI device (either a PCI-to-PCI
> > bridge or an endpoint).  For such devices there is no address
> > translation.
> > 
> > Any address translation would only occur at a PCI host bridge that has
> > CPU address space on the upstream side and PCI address space on the
> > downstream side.
> > 
> > Since (IIUC), we're building "ranges" for a device in the interior of
> > a PCI hierarchy where address translation doesn't happen, I think both
> > the parent and child addresses in "ranges" should be in the PCI
> > address space.
> > 
> > But right now, I think they're both in the CPU address space, and we
> > basically do this:
> > 
> >   of_pci_prop_ranges(struct pci_dev *pdev, ...)
> >     res = &pdev->resource[...];
> >     for (j = 0; j < num; j++) {   # iterate through BARs or windows
> >       val64 = res[j].start;       # CPU physical address
> >       # <convert to PCI address space>
> >       of_pci_set_address(..., rp[i].parent_addr, val64, ...)
> >         rp[i].parent_addr = val64
> >       if (pci_is_bridge(pdev))
> >         memcpy(rp[i].child_addr, rp[i].parent_addr)
> >       else
> >         rp[i].child_addr[0] = j   # child addr unset/unused
> > 
> > Here "res" is a PCI BAR or bridge window, and it contains CPU physical
> > addresses, so "val64" is a CPU physical address.  It looks to me like
> > we should convert to a PCI bus address at the point noted above, based
> > on any translation described by the PCI host bridge.  That *should*
> > naturally result in a 32-bit value if OF_PCI_ADDR_SPACE_MEM64 is not
> > set.
> 
> That's exactly the point, except that right now a 64 bit address would
> "unnaturally" pass through even if OF_PCI_ADDR_SPACE_MEM64 is not set.
> Hence the purpose of this patch.


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux