This brings over the few know-how items and little things I found about the BCMBCA LEDs in my previous duplicate driver. This was tested on the BCM6846-based Genexis XG6846B. The main addition is the ability to define the number shifting bits in the serial shift register which is necessary if the previous boot stages have not set up the hardware properly before. Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx> --- Changes in v2: - Drop the u32 $ref in the schema, -bits is a standard suffix. - Fix algorithm for shift register configuration. - Fix spelling errors and numbering errors. - Link to v1: https://lore.kernel.org/r/20240920-bcm63138-leds-v1-0-c150871324a0@xxxxxxxxxx --- Linus Walleij (4): dt-bindings: leds: bcm63138: Add shift register bits leds: bcm63138: Use scopes and guards leds: bcm63138: Handle shift register config leds: bcm63138: Add some register defines .../devicetree/bindings/leds/leds-bcm63138.yaml | 12 ++++++++++ drivers/leds/blink/leds-bcm63138.c | 28 ++++++++++++---------- 2 files changed, 28 insertions(+), 12 deletions(-) --- base-commit: 5724faee6be4109d7a3168625357e4127f42b5d2 change-id: 20240920-bcm63138-leds-1bc5f41c47cd Best regards, -- Linus Walleij <linus.walleij@xxxxxxxxxx>