Add mdss0 and mdp devicetree nodes for sa8775p target. Signed-off-by: Mahadevan <quic_mahap@xxxxxxxxxxx> --- This patch depends on the clock enablement change: https://lore.kernel.org/all/20240816-sa8775p-mm-v3-v1-0-77d53c3c0cef@xxxxxxxxxxx/ --- [v2] - Update commit message mentioning enablement of mdss0 only is done. [Dmitry] - Add resets node and fix indentation. [Dmitry] --- arch/arm64/boot/dts/qcom/sa8775p.dtsi | 87 +++++++++++++++++++++++++++ 1 file changed, 87 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi index 93be4683a31f..27ab1921c1f3 100644 --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/interconnect/qcom,icc.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,sa8775p-dispcc.h> #include <dt-bindings/clock/qcom,sa8775p-gcc.h> #include <dt-bindings/clock/qcom,sa8775p-gpucc.h> #include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h> @@ -2937,6 +2938,92 @@ camcc: clock-controller@ade0000 { #power-domain-cells = <1>; }; + mdss0: display-subsystem@ae00000 { + compatible = "qcom,sa8775p-mdss"; + reg = <0x0 0x0ae00000 0x0 0x1000>; + reg-names = "mdss"; + + /* same path used twice */ + interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>, + <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "mdp0-mem", + "mdp1-mem", + "cpu-cfg"; + + resets = <&dispcc0 MDSS_DISP_CC_MDSS_CORE_BCR>; + + power-domains = <&dispcc0 MDSS_DISP_CC_MDSS_CORE_GDSC>; + + clocks = <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_MDP_CLK>; + + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x1000 0x402>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + mdss0_mdp: display-controller@ae01000 { + compatible = "qcom,sa8775p-dpu"; + reg = <0x0 0x0ae01000 0x0 0x8f000>, + <0x0 0x0aeb0000 0x0 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_MDP_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "iface", + "lut", + "core", + "vsync"; + + assigned-clocks = <&dispcc0 MDSS_DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdss0_mdp_opp_table>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + + interrupt-parent = <&mdss0>; + interrupts = <0>; + + mdss0_mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-375000000 { + opp-hz = /bits/ 64 <375000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + + opp-575000000 { + opp-hz = /bits/ 64 <575000000>; + required-opps = <&rpmhpd_opp_turbo>; + }; + + opp-650000000 { + opp-hz = /bits/ 64 <650000000>; + required-opps = <&rpmhpd_opp_turbo_l1>; + }; + }; + }; + }; + dispcc0: clock-controller@af00000 { compatible = "qcom,sa8775p-dispcc0"; reg = <0x0 0x0af00000 0x0 0x20000>; -- 2.34.1
