Hi, this is an initial proposal to complete support for manually defining partition table. Some background on this. Many OEM on embedded device (modem, router...) are starting to migrate from NOR/NAND flash to eMMC. The reason for this is that OEM are starting to require more and more space for the firmware and price difference is becoming so little that using eMMC is only benefits and no cons. Given these reason, OEM are also using very custom way to provide a partition table and doesn't relay on common method like writing a table on the eMMC. One way that is commonly used is to hardcode the partition table and pass it to the system via various way (cmdline, special glue driver, block2mtd...) This way is also used on Android where the partition table is passed from the bootloader via cmdline. One reason to use this method is to save space on the device and to permit more flexibility on partition handling. What this series does is complete support for this feature. It's possible to use the cmdline to define a partition table similar to how it's done for MTD but this is problematic for a number of device where tweaking the cmdline is not possible. This series adds OF support to make it possible to define a partition table in the Device Tree. We implement a similar schema to the MTD fixed-partition, where we define a "label" and a "reg" with "offset" and "size". A new block partition parser is introduced that check if the block device have an OF node attached and check if a fixed-partition table is defined. If a correct node is found, then partition table is filled. cmdline will still have priority to this new parser. Some block device also implement boot1 and boot2 additional disk. Similar to the cmdline parser, these disk can have OF support using the "partitions-boot0" and "partitions-boot1" additional node. It's also completed support for declaring partition as read-only as this feature was introduced but never finished in the cmdline parser. Posting as RFC for any comments or additional checks on OF parser code. I hope this solution is better accepted as downstream this is becoming a real problem with a growing number of strange solution for the simple task of providing a fixed partition table. Changes v2: - Reference bytes in DT instead of Sector Size - Validate offset and size after Sector Size conversion - Limit boot0 and boot1 to eMMC and add comments about JEDEC spec - Generalize MTD partition schema and introduce block partitions schema - Add missing code to actually attach the OF parser to block partition core - Add reviewed by tag for read-only patch Christian Marangi (5): block: add support for defining read-only partitions docs: block: Document support for read-only partition in cmdline part block: add support for partition table defined in OF dt-bindings: block: Generalize and introduce property for partitions dt-bindings: mmc: Document support for partition table in mmc-card Documentation/block/cmdline-partition.rst | 5 +- .../bindings/block/partitions/partition.yaml | 33 ++++ .../bindings/block/partitions/partitions.yaml | 27 ++++ .../devicetree/bindings/mmc/mmc-card.yaml | 57 +++++++ .../bindings/mtd/partitions/partition.yaml | 10 +- block/blk.h | 1 + block/partitions/Kconfig | 8 + block/partitions/Makefile | 1 + block/partitions/check.h | 1 + block/partitions/cmdline.c | 3 + block/partitions/core.c | 6 + block/partitions/of.c | 144 ++++++++++++++++++ 12 files changed, 287 insertions(+), 9 deletions(-) create mode 100644 Documentation/devicetree/bindings/block/partitions/partition.yaml create mode 100644 Documentation/devicetree/bindings/block/partitions/partitions.yaml create mode 100644 block/partitions/of.c -- 2.45.2
