Re: [PATCH v4 6/6] arm64: dts: qcom: x1e80100: Add support for PCIe3 on x1e80100

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Sep 24, 2024 at 04:26:34PM +0200, Konrad Dybcio wrote:
> On 24.09.2024 12:14 PM, Qiang Yu wrote:
> > Describe PCIe3 controller and PHY. Also add required system resources like
> > regulators, clocks, interrupts and registers configuration for PCIe3.
> > 
> > Signed-off-by: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
> > Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> > ---
> 
> Qiang, Mani
> 
> I have a RTS5261 mmc chip on PCIe3 on the Surface Laptop.

Is it based on x1e80100?

> Adding the global irq breaks sdcard detection (the chip still comes
> up fine) somehow. Removing the irq makes it work again :|
> 
> I've confirmed that the irq number is correct
> 

Yeah, I did see some issues with MSI on SM8250 (RB5) when global interrupts are
enabled and I'm working with the hw folks to understand what is going on. But
I didn't see the same issues on newer platforms (sa8775p etc...).

Can you please confirm if the issue is due to MSI not being received from the
device? Checking the /proc/interrutps is enough.

- Mani

-- 
மணிவண்ணன் சதாசிவம்




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux