On 9/23/24 3:57 PM, Lukasz Majewski wrote:
Up till now the fsl,lcdif.yaml was requiring the "port" property as a
must have to specify the display interface on iMX devices.
However, it shall also be possible to specify the display only with
passing its timing parameters (h* and v* ones) via "display" property:
(as in
Documentation/devicetree/bindings/display/panel/display-timings.yaml).
Timings should go into panel node, not into scanout engine node.
See e.g. panel-timings in arch/arm64/boot/dts/freescale/imx8mm-phg.dts ,
in your case the compatible might be "panel-dpi" .
