[PATCH] dt-bindings: lcdif: Add support for specifying display with timings

[Lukasz Majewski <lukma@xxxxxxx>]

Up till now the fsl,lcdif.yaml was requiring the "port" property as a
must have to specify the display interface on iMX devices.

However, it shall also be possible to specify the display only with
passing its timing parameters (h* and v* ones) via "display" property:
(as in
Documentation/devicetree/bindings/display/panel/display-timings.yaml).

Such approach has already been used (also in the mainline) with several
imx28, imx5x and imx6q devices.

This change allows them to pass the DT_SCHEMA check without issues.

Signed-off-by: Lukasz Majewski <lukma@xxxxxxx>
---
 .../bindings/display/fsl,lcdif.yaml           | 51 ++++++++++++++++++-
 1 file changed, 49 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml
index 8e3a98aeec32..14bb64b5b72d 100644
--- a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml
+++ b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml
@@ -50,6 +50,10 @@ properties:
       - const: disp_axi
     minItems: 1
 
+  display:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle for display timing information
+
   dmas:
     items:
       - description: DMA specifier for the RX DMA channel.
@@ -64,6 +68,9 @@ properties:
       - description: LCDIF Error interrupt
     minItems: 1
 
+  lcd-supply:
+    description: Regulator for LCD supply voltage.
+
   power-domains:
     maxItems: 1
 
@@ -76,7 +83,10 @@ required:
   - reg
   - clocks
   - interrupts
-  - port
+
+patternProperties:
+  'display([0-9])':
+    description: Node with display timing parameters
 
 additionalProperties: false
 
@@ -197,5 +207,42 @@ examples:
             };
         };
     };
-
+  - |
+    lcdif: lcdif@80030000 {
+        compatible = "fsl,imx28-lcdif";
+        reg = <0x80030000 0x2000>;
+        interrupts = <38>;
+        clocks = <&clks 55>;
+        dmas = <&dma_apbh 13>;
+        dma-names = "rx";
+        pinctrl-names = "default";
+        pinctrl-0 = <&lcdif_24bit_pins_a>, <&lcdif_sync_pins_bttc>,
+                 <&lcdif_reset_pins_bttc>;
+        lcd-supply = <&reg_3v3>;
+        display = <&display0>;
+        status = "okay";
+
+        display0: display0 {
+                bits-per-pixel = <32>;
+                bus-width = <24>;
+                display-timings {
+                        native-mode = <&timing0>;
+                        timing0: timing0 {
+                                clock-frequency = <6500000>;
+                                hactive = <320>;
+                                vactive = <240>;
+                                hfront-porch = <20>;
+                                hback-porch = <38>;
+                                hsync-len = <30>;
+                                vfront-porch = <4>;
+                                vback-porch = <14>;
+                                vsync-len = <4>;
+                                hsync-active = <0>;
+                                vsync-active = <0>;
+                                de-active = <0>;
+                                pixelclk-active = <1>;
+                        };
+                };
+        };
+    };
 ...
-- 
2.39.2