Hi,
this series adds support for a new member in our IOTA platform.
The board is based on the i.MX8MP SoC. The first two patches
add support for most of the board functionality except USB Type-C
port and some other minor things.
[PATCH 3] adds new device tree binding for a Diodes Incorporated
PI5USB30213A Type-C Controller and [PATCH 4] enables that port on
the IOTA2 Lumpy board.
We also wrote a driver for that Type-C port controller. I would like
to get that driver upstream as well but I expect it will take much
more iterations and effort to get it into mainline-ready shape so
I intentionally excluded it from this series. AFAIK it should not
be a problem to accept a device tree binding for a HW that does not
have a driver in the kernel yet.
Michal Vokáč (2):
dt-bindings: arm: Add i.MX8MP IOTA2 Lumpy board
arm64: dts: imx: Add imx8mp-iota2-lumpy board
Petr Benes (2):
dt-bindings: usb: Add Diodes Incorporated PI5USB30213A Type-C
Controller
arm64: dts: imx8mp-iota2: Enable the USB Type-C port
.../devicetree/bindings/arm/fsl.yaml | 1 +
.../bindings/usb/diodes,pi5usb30213a.yaml | 88 +++
arch/arm64/boot/dts/freescale/Makefile | 1 +
.../boot/dts/freescale/imx8mp-iota2-lumpy.dts | 517 ++++++++++++++++++
4 files changed, 607 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/diodes,pi5usb30213a.yaml
create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-iota2-lumpy.dts
--
2.43.0
