On Mon, Sep 23, 2024 at 01:10:17PM +0300, Antoniu Miclaus wrote: > Add support for AD485X fully buffered, 8-channel simultaneous sampling, > 16/20-bit, 1 MSPS data acquisition system (DAS) with differential, wide > common-mode range inputs. > > Some particularities: > 1. softspan - the devices support multiple softspans which are represented in iio > through offset/scale. The current handling implies changing both > the scale and the offset separately via IIO, therefore in order to > properly set the softspan, each time the offset changes the softspan > is set to the default value. And only after changing also the scale > the desired softspan is set. This is the approach we are suggesting > since we need the softspan configurable from userspace and not from > devicetree. > > 2. packet format - Data provided on the CMOS and LVDS conversion data output buses > are packaged into eight channel packets. This is currently handled > as extended info. Thanks for the series! Quick note: *** in the Subject was also meant to be removed, but it's fine as long as it's a cover letter and git send-email does its job. -- With Best Regards, Andy Shevchenko