[PATCH 3/5] ARM: dts: renesas: genmai: sort nodes

[Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>]

To make future additions easier.

Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---
 arch/arm/boot/dts/renesas/r7s72100-genmai.dts | 102 +++++++++---------
 1 file changed, 51 insertions(+), 51 deletions(-)

diff --git a/arch/arm/boot/dts/renesas/r7s72100-genmai.dts b/arch/arm/boot/dts/renesas/r7s72100-genmai.dts
index c4c2d750ad79..5728b1080ca6 100644
--- a/arch/arm/boot/dts/renesas/r7s72100-genmai.dts
+++ b/arch/arm/boot/dts/renesas/r7s72100-genmai.dts
@@ -72,45 +72,6 @@ led2 {
 	};
 };
 
-&pinctrl {
-
-	scif2_pins: serial2 {
-		/* P3_0 as TxD2; P3_2 as RxD2 */
-		pinmux = <RZA1_PINMUX(3, 0, 6)>, <RZA1_PINMUX(3, 2, 4)>;
-	};
-
-	i2c2_pins: i2c2 {
-		/* RIIC2: P1_4 as SCL, P1_5 as SDA */
-		pinmux = <RZA1_PINMUX(1, 4, 1)>, <RZA1_PINMUX(1, 5, 1)>;
-	};
-
-	ether_pins: ether {
-		/* Ethernet on Ports 1,2,3,5 */
-		pinmux = <RZA1_PINMUX(1, 14, 4)>,/* P1_14 = ET_COL  */
-			 <RZA1_PINMUX(5, 9, 2)>, /* P5_9 = ET_MDC   */
-			 <RZA1_PINMUX(3, 3, 2)>, /* P3_3 = ET_MDIO */
-			 <RZA1_PINMUX(3, 4, 2)>, /* P3_4 = ET_RXCLK */
-			 <RZA1_PINMUX(3, 5, 2)>, /* P3_5 = ET_RXER  */
-			 <RZA1_PINMUX(3, 6, 2)>, /* P3_6 = ET_RXDV  */
-			 <RZA1_PINMUX(2, 0, 2)>, /* P2_0 = ET_TXCLK */
-			 <RZA1_PINMUX(2, 1, 2)>, /* P2_1 = ET_TXER  */
-			 <RZA1_PINMUX(2, 2, 2)>, /* P2_2 = ET_TXEN  */
-			 <RZA1_PINMUX(2, 3, 2)>, /* P2_3 = ET_CRS   */
-			 <RZA1_PINMUX(2, 4, 2)>, /* P2_4 = ET_TXD0  */
-			 <RZA1_PINMUX(2, 5, 2)>, /* P2_5 = ET_TXD1  */
-			 <RZA1_PINMUX(2, 6, 2)>, /* P2_6 = ET_TXD2  */
-			 <RZA1_PINMUX(2, 7, 2)>, /* P2_7 = ET_TXD3  */
-			 <RZA1_PINMUX(2, 8, 2)>, /* P2_8 = ET_RXD0  */
-			 <RZA1_PINMUX(2, 9, 2)>, /* P2_9 = ET_RXD1  */
-			 <RZA1_PINMUX(2, 10, 2)>,/* P2_10 = ET_RXD2 */
-			 <RZA1_PINMUX(2, 11, 2)>;/* P2_11 = ET_RXD3 */
-	};
-};
-
-&extal_clk {
-	clock-frequency = <13330000>;
-};
-
 &bsc {
 	flash@0 {
 		compatible = "cfi-flash";
@@ -167,18 +128,6 @@ partition@60000 {
 	};
 };
 
-&usb_x1_clk {
-	clock-frequency = <48000000>;
-};
-
-&rtc_x1_clk {
-	clock-frequency = <32768>;
-};
-
-&mtu2 {
-	status = "okay";
-};
-
 &ether {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ether_pins>;
@@ -194,6 +143,10 @@ phy0: ethernet-phy@0 {
 	};
 };
 
+&extal_clk {
+	clock-frequency = <13330000>;
+};
+
 &i2c2 {
 	status = "okay";
 	clock-frequency = <400000>;
@@ -208,6 +161,10 @@ eeprom@50 {
 	};
 };
 
+&mtu2 {
+	status = "okay";
+};
+
 &ostm0 {
 	status = "okay";
 };
@@ -216,6 +173,45 @@ &ostm1 {
 	status = "okay";
 };
 
+&pinctrl {
+
+	scif2_pins: serial2 {
+		/* P3_0 as TxD2; P3_2 as RxD2 */
+		pinmux = <RZA1_PINMUX(3, 0, 6)>, <RZA1_PINMUX(3, 2, 4)>;
+	};
+
+	i2c2_pins: i2c2 {
+		/* RIIC2: P1_4 as SCL, P1_5 as SDA */
+		pinmux = <RZA1_PINMUX(1, 4, 1)>, <RZA1_PINMUX(1, 5, 1)>;
+	};
+
+	ether_pins: ether {
+		/* Ethernet on Ports 1,2,3,5 */
+		pinmux = <RZA1_PINMUX(1, 14, 4)>,/* P1_14 = ET_COL  */
+			 <RZA1_PINMUX(5, 9, 2)>, /* P5_9 = ET_MDC   */
+			 <RZA1_PINMUX(3, 3, 2)>, /* P3_3 = ET_MDIO */
+			 <RZA1_PINMUX(3, 4, 2)>, /* P3_4 = ET_RXCLK */
+			 <RZA1_PINMUX(3, 5, 2)>, /* P3_5 = ET_RXER  */
+			 <RZA1_PINMUX(3, 6, 2)>, /* P3_6 = ET_RXDV  */
+			 <RZA1_PINMUX(2, 0, 2)>, /* P2_0 = ET_TXCLK */
+			 <RZA1_PINMUX(2, 1, 2)>, /* P2_1 = ET_TXER  */
+			 <RZA1_PINMUX(2, 2, 2)>, /* P2_2 = ET_TXEN  */
+			 <RZA1_PINMUX(2, 3, 2)>, /* P2_3 = ET_CRS   */
+			 <RZA1_PINMUX(2, 4, 2)>, /* P2_4 = ET_TXD0  */
+			 <RZA1_PINMUX(2, 5, 2)>, /* P2_5 = ET_TXD1  */
+			 <RZA1_PINMUX(2, 6, 2)>, /* P2_6 = ET_TXD2  */
+			 <RZA1_PINMUX(2, 7, 2)>, /* P2_7 = ET_TXD3  */
+			 <RZA1_PINMUX(2, 8, 2)>, /* P2_8 = ET_RXD0  */
+			 <RZA1_PINMUX(2, 9, 2)>, /* P2_9 = ET_RXD1  */
+			 <RZA1_PINMUX(2, 10, 2)>,/* P2_10 = ET_RXD2 */
+			 <RZA1_PINMUX(2, 11, 2)>;/* P2_11 = ET_RXD3 */
+	};
+};
+
+&rtc_x1_clk {
+	clock-frequency = <32768>;
+};
+
 &rtc {
 	status = "okay";
 };
@@ -237,6 +233,10 @@ codec: codec@0 {
 	};
 };
 
+&usb_x1_clk {
+	clock-frequency = <48000000>;
+};
+
 &wdt {
 	timeout-sec = <60>;
 	status = "okay";
-- 
2.45.2