On Fri, 20 Sep 2024 23:59:03 +0200, Linus Walleij wrote:
> The BCM63138 family of serial LED controllers has a register
> where we can set up bits for the shift registers. These are
> the number of rounds the bits need to be shifted before all
> bits have been shifted through the external shift registers.
>
> Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
> ---
> Documentation/devicetree/bindings/leds/leds-bcm63138.yaml | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
My bot found errors running 'make dt_binding_check' on your patch:
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml: properties:brcm,serial-shift-bits: '$ref' should not be valid under {'const': '$ref'}
hint: Standard unit suffix properties don't need a type $ref
from schema $id: http://devicetree.org/meta-schemas/core.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/leds/leds-bcm63138.example.dtb: leds@ff800800: brcm,serial-shift-bits: 16 is not of type 'array'
from schema $id: http://devicetree.org/schemas/leds/leds-bcm63138.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/leds/leds-bcm63138.example.dtb: leds@ff800800: brcm,serial-shift-bits: 16 is not of type 'array'
from schema $id: http://devicetree.org/schemas/property-units.yaml#
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240920-bcm63138-leds-v1-1-c150871324a0@xxxxxxxxxx
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
