This brings over the few know-how items and little things
I found about the BCMBCA LEDs in my previous duplicate driver.
This was tested on the BCM6846-based Genexis XG6846B.
The main addition is the ability to define the number shifting
bits in the serial shift register which is necessary if the
previous boot stages have not set up the hardware properly
before.
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
Linus Walleij (4):
dt-bindings: leds: bcm63128: Add shift register bits
leds: bcm63138: Use scopes and guards
leds: bcm63128: Handle shift register config
leds: bcm63128: Add some register defines
.../devicetree/bindings/leds/leds-bcm63138.yaml | 13 ++++++++++
drivers/leds/blink/leds-bcm63138.c | 28 ++++++++++++----------
2 files changed, 29 insertions(+), 12 deletions(-)
---
base-commit: 98f7e32f20d28ec452afb208f9cffc08448a2652
change-id: 20240920-bcm63138-leds-1bc5f41c47cd
Best regards,
--
Linus Walleij <linus.walleij@xxxxxxxxxx>
