On 9/17/2024 7:08 PM, Dmitry Baryshkov wrote:
On Tue, Sep 17, 2024 at 02:36:30PM GMT, Sachin Gupta wrote:
Add SD Card node for Qualcomm qcs6490-rb3gen2 Board.
Consider adding mmc0 or mmc2 alias for the sdhc_2 node.
Thank you for your input. However, aliases you mentioned already exists
in the sc7280.dtsi header file.
Signed-off-by: Sachin Gupta <quic_sachgupt@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 33 ++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
index 0d45662b8028..5df3167651ca 100644
--- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
+++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
@@ -716,9 +716,42 @@
status = "okay";
};
+&sdc2_clk {
+ bias-disable;
+ drive-strength = <16>;
+};
Please move all pinctrl-related nodes below the PINCTRL comment.
Will update in next patch.
+
+&sdc2_cmd {
+ bias-pull-up;
+ drive-strength = <10>;
+};
+
+&sdc2_data {
+ bias-pull-up;
+ drive-strength = <10>;
+};
Thanks,
Sachin Gupta
+
>>
&tlmm {
gpio-reserved-ranges = <32 2>, /* ADSP */
<48 4>; /* NFC */
+
+ sd_cd: sd-cd-state {
+ pins = "gpio91";
+ function = "gpio";
+ bias-pull-up;
+ };
There is also a special PINCRTL_related TLMM imstance down the file,
move it to that node.
Will update in next patch.
};
&uart5 {
--
2.17.1
